Panasonic AG-HPD24PJ Operating Instructions Manual

Also see for AG-HPD24E: Operating instructions

Contents

Panasonic AG-HPD24PJ Operating Instructions Manual Manual pdf 78 page image

Main Mode: Thumbnail Screen 15Main Mode• When playback stops, the cursor moves to the clip played priorto stopping.• Video and audio playback may be disrupted between clips indifferent video formats (1080i, 720p) or compression formats(DVCPRO HD, DVCPRO50, DVCPRO, DV, AVC-Intra 50 andAVC-Intra 100).• If continuous playback is performed with clips whose videoformat is the same but whose audio bit depth is different, theaudio is muted between clips.• When a 24-bit audio clip is played back in a playback modeother than the normal mode using the PLAY button, theaudio bit depth becomes 16-bit.• Changing the thumbnail screen to text memo display makes itpossible to start play back from text memo location.(➝ “Playing back from text memo location” This page)• You can select the location from which the thumbnail startsplayback by selecting the SETUP - THUMBNAIL - PB POSITIONmenu setting.(➝ Setup Menu “THUMBNAIL” - “PB POSITION” page 57)When ONE CLIP PLAY is assigned to a USER button, theUSER button allows you to play back the clip at the cursorlocation.◆ NOTE:• The thumbnail screen appears when playback stops at the end ofthe clip or when the STOP button is pressed. The cursor thenmoves to the next clip.• All buttons other than the STOP button are not available duringsingle clip playback.• Single clip playback starts from the position specified on the PBPOSITION menu setting.• When JOG/VAR/SHTL is used to display a still image duringplayback from the thumbnail screen, the USER button to which ONECLIP PLAY has been assigned allows you to play the entire clip toits end from the still image.(➝ Setup Menu “USER BUTTON” page 70)These functions operate in the same manner as in the record/playback screen.(➝ “Variable speed playback” page 8, “Frame-by-frameplayback” page 8)1 Open the thumbnail screen.2 Press the MENU button to select the THUMBNAIL -TEXT MEMO CLIPS menu setting.Thumbnails of clips with text memos appear at the top ofthe LCD monitor. Information on the selected clip textmemo appears in the lower half of the LCD monitor.◆ NOTE:• When a text memo clip for an AVC-Intra clip with a differentSETUP - SYSTEM - FREQUENCY menu setting is displayed, theicon may appear at the text memo location in the lower halfof the monitor instead of the thumbnail that should normallyappear.3 Select the clip (with a text memo) you want play backand press the SET button.The cursor moves to the lower half of the LCD monitor.Playing Back Single ClipsUsing variable speed playback and frame-by-frame playbackPlaying back from text memo location422,3,4Blue indicates selectednumber of text memo clipsand white indicates totalnumber of text memo clips.ThumbnaildisplayIndicates still imagesincluded with the textmemos.The cursor moves.