Panasonic AG-HPX500 Operating Instructions Manual

Also see for AG-HPX500: Brochure & specs Service manual Menu information

Contents

Panasonic AG-HPX500 Operating Instructions Manual Manual pdf 124 page image

124 Setup menu listChapter 7 Menu OperationsItem Description of settings (Items in bold are factory settings.)F-RUN TC SLAVESelects whether slave-locked time code input via the 1394 connector is used or not when the TCGswitch is set to F-RUN.●1394: Records with the slave-locked time code via the 1394 connector.●OFF: Records with the time code selected by the TC MODE item or the TCG switch.1394 UB REGENSelects the user bits to be recorded when recording signals from a device connected to the 1394connector.●ON: Records the user bits of the signal input to the 1394 connector.●OFF: Records the user bits selected in the menu option UB MODE.• Setting this option to ON prioritizes the input signal over the settings made in the menu option UBMODE.• No user bits are recorded when the input signal does not contain any user bits.• The UB MODE settings are used when no signal is input to the TC IN connector.AUDIO SETUP screenItem Description of settings (Items in bold are factory settings.)FRONT VR CH1Selects the function of the FRONT AUDIO LEVEL control of CH1 input.●FRONT: The front control controls FRONT1 and FRONT2 inputs.●REAR: The FRONT AUDIO LEVEL control controls REAR1 input.●ALL: The FRONT AUDIO LEVEL control controls both FRONT1 and REAR1 inputs.●OFF: The FRONT AUDIO LEVEL control does not control the input signal.This control is disabled when the AUDIO SELECT CH1 switch is set to AUTO.FRONT VR CH2Selects the function of the FRONT AUDIO LEVEL control of CH2 input.●FRONT: The FRONT AUDIO LEVEL control controls FRONT2 input.●REAR: The FRONT AUDIO LEVEL control controls REAR2 input.●ALL: The FRONT AUDIO LEVEL control controls both FRONT2 and REAR2 inputs.●OFF: The FRONT AUDIO LEVEL control does not control the input signal.This control is disabled when the AUDIO SELECT CH2 switch is set to AUTO.MIC LOWCUT CH1 Turns on and off the CH1 microphone lowcut filter.●ON, OFFMIC LOWCUT CH2 Turns on and off the CH2 microphone lowcut filter.●ON, OFFMIC LOWCUT CH3 Turns on and off the CH3 microphone lowcut filter.●ON, OFFMIC LOWCUT CH4 Turns on and off the CH4 microphone lowcut filter.●ON, OFFLIMITER CH1 Turns on and off the CH1 limiter.●ON, OFFLIMITER CH2 Turns on and off the CH2 limiter.●ON, OFFLIMITER CH3 Turns on and off the CH3 limiter.●ON, OFFLIMITER CH4 Turns on and off the CH4 limiter.●ON, OFFAUTO LEVEL CH3 Selects the method for selecting CH3 level.●ON: Automatically controls CH3 level.●OFF: Enables dial control of CH3 level via dial.AUTO LEVEL CH4 Selects the method for selecting CH4 level.●ON: Automatically controls CH4 level.●OFF: Enables dial control of CH4 level via dial.25M REC CH SEL Selects the audio channels to be recorded in the DVCPRO and DV formats.●2CH: Only recorded on CH1 and CH2.●4CH: Recorded on channels 1 to 4.TEST TONESelects the test signal.●OFF: Disables test tone output.●NORMAL: Outputs test tones to channels 1, 2, 3 and 4 when the OUTPUT/AUTO KNEE selectorswitch is set to BARS and the AUDIO IN switch CH1 is set to FRONT1.●ALWAYS: Outputs test tones to channels 1, 2, 3 and 4 when the OUTPUT/AUTO KNEE selectorswitch is set to BARS.●CH SEL: Outputs test tones to channels selected by setting AUDIO IN switch CH1 to FRONT1 orswitch CH2 to FRONT with the OUTPUT/AUTO KNEE selector switch set to BARS.When NORMAL or CH SEL is selected, setting the AUDIO IN switch CH1 to FRONT2 will not output atest tone.F.MIC POWER1 Turns on and off the phantom power supply for the front microphone connected to CH1.●ON, OFF