Panasonic AG-HPX500 Operating Instructions Manual

Also see for AG-HPX500: Brochure & specs Service manual Menu information

Contents

Panasonic AG-HPX500 Operating Instructions Manual Manual pdf 71 page image

71Viewfinder Screen Status DisplaysChapter 4 Adjustments and Settings for Recording27 Special recording displayThis display appears when the REC FUNCTIONoption of the setting menu RECORDING SETUPscreen is set to INTERVAL, ONE SHOT or LOOP,and when PRE REC is set to ON.A P2 card inserted in a free slot after start of aspecial recording mode is not used for recording.Insert P2 cards before start of recording.Stop special recording and insert the P2 cardagain.28 Lens chromatic aberration compensation(CAC) indicatorDuring a mode check, it indicates that lenschromatic aberration compensation (CAC)operates normally.29 AWB, ABB error indicationIn a mode check, the status of AWB and ABB thatdo not operate normally is shown.■Safety zoneThe range of the zone is indicated by the SAFETYZONE item on the DISPLAY SETUP screen.• 4:3:This indicates the position which is cropped to 4:3.• 90%:This indicates the range (90%) in which signals canbe displayed by an ordinary home-use TV set.Warnings• COPY INHIBITEDInput of DV formats via the 1394 connector in MCRmode cannot be recorded normally since the contentsare copyright protected.• EXTERNAL 1394 DISCONNECTWhen the 1394 CONTROL item of the OTHERFUNCTIONS screen of the setup menu is set to EXTand recording without connecting external units with1394 terminal, this display appears.• INCOMPATIBLE CARDThe card cannot be used since it does not comply withthe specified standard.• DIR ENTRY NG CARDIndicates a card where folder location has becomecorrupted. This type of card cannot be used for specialrecording modes (interval, ONE SHOT and looprecording).A warning appears when such a P2 card is inserted ina P2 device or when recording is completed.• RUN DOWN CARDIndicates that a P2 card has nearly reached the endof its life. This warning message appears each timethe card is inserted or recording is stopped, and it willcontinue to appear until the card is replaced with a P2card with sufficient life remaining. Proper recordingand playback may not be possible with a P2 card thatis near the end of its life, so we recommend replacingit with another one as soon as possible.• FORMAT ERR !Indicates a P2 card that does not meet the P2 cardstandard.• CANNOT ACCESSCannot access clips.• CANNOT DELETECannot delete clips.• CANNOT FORMATCannot format P2 cards or SD memory cards.• CANNOT REPAIRCannot repair clips.• CARD FULLThe P2 card does not have enough free space forrecording.• WRITE PROTECTEDThe P2 card or SD memory card is writeprotected.• NO CARDA P2 card or SD memory card has not been inserted.• NO FILEThere are no files (version upgrade files, etc.).P2 card playback dataindication• EOS: End of stream. No more data is available in theforward playback direction.• BOS: Beginning of stream. No more data is availablein the rearward playback direction.• P2 SLOT: Appears when pressing the USER buttonto which SLOT SEL is assigned.