| 
112-2 Display2 CONTROLS AND CONNECTORS2 3 4 51 6 7 8 9 13121110 13 141 Operation mode displayShows the operation modes.Playback Recording Rewind Fast-forwardTimelapseplaybackStill Record-pauseReverse stepslow playbackField-by-fieldplaybackRewindsearchFast-forwardsearchReverseplayback5 Recording/playback speed display• Normally shows the recording/playback speed mode setwith the [TIME MODE] button.• Shows the following indications in the Alarm Search mode.During alarm search: Shows the specified alarm number(example: AL12)During alarm scan: Shows the alarm scan mode (ALSC).During date/time search: Shows the specified date andtime (example 2310).• Shows setting details in menu switch setting.• When an error occurs, the error indication “E-**” blinks (ifthe menu switch on the screen is set to “ON”).For error indications, refer to page 53.6 [TIMER] indicationLights during timer recording programming/operation.7 [REPEAT] indicationWhen in the menu is setto “ON”, this indication is shown. When MODE> in the menu is set to“STOP” and the Repeat Record mode is engaged, the[REPEAT] indication goes out if alarm recording or sensorrecording takes place.8 [OVERLAP] indicationBlinks when programs scheduled for timer recording overlap.9 Timer program numberAll programmed timer recording numbers light.During timer recording, the number of the program beingrecorded blinks. When the timer recording ends, thisnumber goes out.0 [AL] (alarm) indicationShown during alarm recording or sensor recording.Blinks when alarm recording or sensor recording ends.! [S-VHS] indicationLights when a S-VHS cassette is loaded. In the playbackmode, it lights during playback of a tape recorded in the S-VHS mode.@ [LOCK] indicationLights when the operation lock function is activated.# [AL REC] (alarm recording) indicationLights when the menu switch on the SENSOR MODE> screen is set to “ALARM” or “AL/SENSOR”.$ [SENSOR REC] (sensor recording) indicationLights when the menu switch on the SENSOR MODE> screen is set to “SENSOR” or “AL/SENSOR”.* ( ) mark in the Rec/Pause mode is shown in red.2 Cassette indicationLights when a cassette is loaded. Blinks when a cassetteis being ejected.3 [SP/EP] indicationShows the standard (SP) mode or extended (EP) modeduring recording/playback. During ordinary timelapserecording/playback, the [SP] indication is shown.The [EP] indication is shown during recording in the HDR(High-Density Record) mode or during playback of a tapesection recorded in the HDR mode.4 Tape counter/clock indication• Shows the current time (hour: minute: second), tapecontrol counter (00H 00M 00S — 23H 59M 59S) or tapereel counter (0 — 9999) when the operating mode is on.The display can be selected with the [DISPLAY] button.Shows the current time when the operating mode is off.When a cassette is ejected, the tape control counter andtape reel counter are reset automatically.• When the cassette is rewound to the beginning in theRepeat Recording or Auto Rewind mode using the counterend output function, the tape control counter and tapereel counter are reset.• The control and reel counter counts slowly in the Timelapsemode.• In the timelapse mode, the control counter shows the timeequivalent to that shown when a tape is played back in the2H or 6H mode.(Example: The control counter advances 1 second forabout 8 minutes in the 960H ordinary timelapse mode.)• During date/time search setting and operation, “td” isshown in place of the seconds.• Shows the setting item during menu switch setting. |
