| 
43*123*1234567*...*.......*SEC[RRDTARR*RXNAEEUAUEE*ITTLCCRPTPP[/**A**AEOEESERTRMTT**AARXEAMO-IERTEITCP/DMONE**/**ESEONDWPRERESE*D***LEXENEN*E*M*ACTCDNS***O*Y****DO***D***M***R***E***O***********D***M*******E***O*******]*N*DS*1*****O*EE*8******R*]N*0*****OMO*SOSOOOO*FAF*OFEFFFF*FLF*RFCFFFF6-7 Repeat RecordingWhen the tape comes to the end during recording, it is automatically rewound and recording starts again from the beginning.6 RECORDING5 To execute repeat recording, set in to “ON”.• The “REPEAT” indication in the VCR’s display lights.5 Setting the menu switch in• If this menu switch is set to “STOP”, the Stop mode isforcibly engaged when the tape ends even if there isan alarm or sensor recording.To continue repeat recording even if an alarmrecording or sensor recording takes place duringrecording, set to “OFF”.When the Tape End Forced Stop mode and RepeatRec mode are engaged and an alarm or sensorrecording takes place, the “REPEAT” indication goesout.5 Automatic recording check functionThis unit is provided with an automatic recordingcheck function which automatically determineswhether or not recording is satisfactory at the tapebeginning in repeat recording.• To activate the automatic recording checkfunction, set the menuswitch in to “ON”.5 Operation of the automatic recording checkfunction• Recording is performed from the beginning of thetape for several seconds during repeat recording.Then the recorded section is automatically playedback to check whether or not the signals havebeen recorded properly. If the recording issatisfactory, recording resumes.• If the recording is unsatisfactory, the heads arecleaned automatically. Recording is restarted forseveral seconds and then the recording ischecked again. If the recording is stillunsatisfactory, the error code “E-09” is shown onthe display and recording resumes.Tape beginning positionAuto recording forseveral secondsRepeat recordingRecording check RecordingNormalAuto headcleaning RecordingRecording checkThe error code “E-09”remains on the display.Auto headcleaningAuto recording forseveral secondsDisplayRecordingNormalDefectDefectVIDEO/VTR MODE screenALARM/SENSOR MODE screen5 When the menu switch is setto “ON”* When repeat recording is executed, any previouslyexecuted alarm recordings will be erased.Note:• Continuous repeat recording over long periodsmay produce excessive wear and tear on thetape and VCR. Be sure to replace the tapeperiodically (refer to page 28).Set to “OFF”*123*1234567*...*.......*IDQ*HMEAARR*NEU*IEXUUEE*TA*GMTTTPP*AS*HOOOEE[II*RT**AAV*L-[DYIRRTTI**VVEMEE**D***TNSECWPRE***RSTR**LEO****IOC*AC****MTPRH*Y*M***OY*EE***O***D*CC***D***ER**K***E***]E******]****C*******************************L***********IOO*OOOOOOO*NFF*FFFFFFO*EFF*FFFFFFN Set to “ON”. |
