Panasonic AG-YAGHG Operating Instructions Manual

Contents

Panasonic AG-YAGHG Operating Instructions Manual Manual pdf 8 page image

E-7ENGLISHMounting to the Digital CamerayyMake sure that a DC power supply is not connected to the unit’s DC IN terminal and that thedigital camera is turned off.(Mounting or dismounting while the power is on may result in malfunction.)1 Remove the cover for the battery grip connector and cover for the interface unitconnector on the digital camera, and  remove the electrical contact and interfacecontact caps on the unit.yyStore the connector covers and contact caps safely to avoid loss.yyTo protect the terminals, reattach the covers and caps after you finish using the unit.Cover for the battery gripconnectorCover for the interface unitconnectorTerminal caps2 Loosen the HDMI connection terminal screw (A),and slide the HDMI connection terminal out to theside.yyDo not twist or pull the HDMI connection terminal withexcessive force. Doing so may result in malfunctionor damage.3 Align the attachment screw, contacts, and cameraattachment pins, and attach the digital camera.4 Rotate the attachment screw (B) in the direction ofthe arrow and tighten it securely.yyVerify that the attachment screw is tightened securelyduring use.5 Open the terminal cover on the digital camera, slidethe HDMI connection terminal on the unit inward(toward the camera) to connect it, and tighten theHDMI connection terminal screw (A) securely.yyOpen the terminal cover on the digital camera 90degrees, and store it in the HDMI connection terminal.(B)Terminal cover90°(A) Dismounting from the digital camerayyMake sure that a DC power supply is not connected to the unit’s DC IN terminal and thatthe digital camera is turned off, and then perform the mounting procedure in reverse order(disconnect the HDMI connection terminal before rotating the attachment screw (B)).Performing the procedure in the incorrect order may result in damage.