Panasonic AJ-D650 Operating Instructions Manual

Also see for AJ-D650P: User guide Operating instructions

(2) Send format [controller (PC) VTR]Data format[STX] [command] [:] [data] [ETX]02h XX XX XX 3Ah XX-XX 03h (ASCII code: symbols, numbers, upper-caseletters)20h• [command] :Command identifier; a 3-byte identifier (ASCII code: symbols, numbers,upper-case letters) is sent as the command.• [ : ] :This code serves as a delimiter between the command and data.• [data] :Data (ASCII code: symbols, numbers, upper-case letters) can be added inthe number of bytes required.Outline of send procedure from controller1. The send command starts with STX (start of text = 02h). The command is then identifiedby COMMAND which follows and the data is added as required.The format ends with ETX (end of text = 03h).2. When a different command is to be sent, a response is awaited from the VTR, and thenthe command is sent. (See page E-9)3. If STX is sent again before ETX is sent, the receive data buffer inside the VTR is cleared.A command error is returned to the controller, and the data is newly processed with STXwhich was received again at the head.–E-8–