Controls and Their FunctionsShooting (Recording)/Playback Function Section (1)ViewfinderBlack-and-white images can be seen in the viewfinder during recording and playback. Warn-ings and messages relating to the unit’s operating status and settings, zebra pattern, markers(safety zone marker, center marker), etc. can also be seen.PEAKING controlThis is used to adjust the contours of the images inside the viewfinder to facilitate focusing. Itdoes not affect the camera’s output signals.CONTRAST controlThis is used to adjust the contrast of the screen inside the viewfinder. It does not affect thecamera’s output signals.BRIGHT controlThis is used to adjust the brightness of the screen inside the viewfinder. It does not affect thecamera’s output signals.ZEBRA (zebra pattern) switchThis displays the zebra pattern inside the viewfinder.ON: The zebra pattern is displayed.OFF: The zebra pattern is not displayed.When the unit is shipped from the factory, the zebra pattern is set in such a way that thoseparts with an IRE video level from approx. 70% to 85% are displayed. The displaying of partswith a level ranging from 50% to 110% or more or with a certain level can also be set on thesetting menu.Diopter control knobThis is adjusted in such a way that the images on the viewfinder screen are seen most clearlyin accordance with the dioptric power of the camera’s operator.Eye cupViewfinder forward-backward/left-right position clamp leverLoosen this lever to adjust the position of the viewfinder in the forward-backward or left-rightdirection.Eyecup forward-backward movement ringTurn this ring to adjust the position of the eyecup in the forward-backward direction.Viewfinder stopper screwTo detach the viewfinder from the camera, loosen this screw and then detach the view-finder.- 1 4 -
