Setup Card OperationsSetting menu contents can be stored using setup cards (option). This data can then be used toquickly recreate the appropriate setup conditions. Subject data, etc. can also be stored on setupcards. See the Setup Card Application Instructions for a detailed description.Setup cards are optional, and general purpose memory cards (S RAM 64 Kbyte or more) can beused.Setup Card HandlingSetup cards can be inserted and ejected regardless of whether the power is on or off.However, setup cards should not be inserted or ejected during recording as this may result inmisoperation.Ejecting setup cardsLift up on the lower edge of the cover to open the cover and remove the setup card.Take care not to touch the connectors at the front of the setup card.Inserting setup cardsPosition the unit so that the panel with the logo faces you, insert the setup card into the setup cardinsertion slot and then close the cover.Check that the unit is positioned with the logo facing you and that the characters are facing thecorrect direction, and then insert the card. Be sure to insert the card in the correct direction. If thecard is difficult to insert, the card may be backwards or upside-down. In these cases, do not at-tempt to force in the card, but check whether the card is backwards or upside-down and thenreinsert the card.Usage and storage precautionsThe following points should be observed when using and storing setup cards.Avoid high temperatures and humidity.Do not expose setup cards to water.Avoid electrostatic charges.Store setup cards inserted in the unit with the cover closed.- 81 -
