– 56 (E) –CONTENTSBATTVTR SAVE!REC4215053Lamp Displays Inside the ViewfinderThe viewfinder displays are as follows.1. REC (recording) lampThis lamp lights (red) during recording, and flashes when warnings are issued.ÁSee “Warning System” (page 150, 151) for a detailed description.2. BATT (battery) lampWhen the battery voltage has dropped, this lamp begins flashing several minutes before theunit can no longer be operated, and lights when the unit can no longer be operated.To prevent operation from being interrupted, exchange the battery quickly before the batteryruns out.ÁSee “Warning System” (page 151) for a detailed description.3. ! (irregular operation status warning) lampThis lamp lights when the unit enters irregular operation status for any of the items set to ON atthe ! LED page of the setting menu. Applicable items are as follows.ÁSee “Setting the ! Lamp Display” (next page) for selecting ! lamp display items.4. VTR SAVE (VTR power saving) lampThis lamp lights when the VTR SAVE/STBY switch is set to SAVE. It is not lit during recording.5. 50 (50Mbps recording/playback) lampThis lamp lights when the mode for recording at 50 Mbps is selected and when a tape is playedback at 50 Mbps.|Note{The SAVE status is automatically established and the lamp lights regardless of the VTR SAVE/STBY switch position at the time set by the pause timer (pause time) when the unit is in therecording pause mode or when 2 minutes have elapsed since the unit was placed in the playbackpause mode.Setting item Setting contentsThe gain is set to a value otherthan 0 dB.The gain is set to a value otherthan p3 dB.The switch is set to ON.The switch is set to PRESET.The lens extender is being used.The control is set to a valueother than 1B.The switch is set to ON.Lamp lights when the 25 or50 Mbps recording format is set.Gain (0 dB)Gain (p3 dB)SHUTTER switchWHITE PRESET switchLens extenderFilter controlSUPER V switch25M/50M