Panasonic AJ-HD2000 Operating Instructions Manual

Also see for U-20ME1E81: Installation instructions Service manual Service manual Operating instructions Installation instructions

Contents

Panasonic AJ-HD2000 Operating Instructions Manual Manual pdf 8 page image

– 8 –How to display the ≥AUDIO IN menu: ≥AUDIO IN PCM INPUT SELECT menu:menus: #≥AUDIO OUT menu: ≥AUDIO IN CUE INPUT SELECT menu:# F7AUDIO OUTAUDIO OUTF6AUDIO INAUDIO INHOME menu displays∑ Audio signal display area (Either 8 or 4 channels will be automatically displayed depending on theformat used.)Use this to adjust the level of the input audio signals on the AUDIOIN menu. Alternatively, it is used to adjust the level of the audioplayback output signals on the AUDIO OUT menu.Press the L/R buttons to select the audio channel whose signalsare to be output from the AUDIO MONITOR L/R connectors andHEADPHONES jack.These display the type of input signals of each channel.The F1 (CH-1) to F6 (DIGITAL) [or F1 (CH-1) to F13 (CH-8) for 8channels] on the AUDIO IN PCM INPUT SELECT menu are se-lected using the F9 (CH-MIX) key on the AUDIO IN CUE INPUTSELECT menu.[---- ANA: Signals from the ANALOG INPUT connectors.CH1 AES: Signals from the DIGITAL AUDIO INPUT connectors.CH1 SER: Signals from the serial V/A input connectors.{---- INT: Signals from the internal signal generator.[---- LINE: Signals from the CUE IN connector.CUE MIX: CH1 to CH8 signals selected by CUE MIX setting.{---- AUTO: This is always used for digital channel backup pur-poses.∑ Display lampsSYSTEM: This indicates the video system format which was seton the SETUP/SYSTEM menu.1080_59i, 525_59i, 1080_23psf, 1080_23p, 1080_24psf,1080_24p, 720_59p, 1080_50i, 1080_25p, 625_50iTAPE: This indicates the format of the playback tape.“¢¢¢¢¢¢¢¢” appears in the EJECT mode.If a section is unrecorded or if the format of a sectioncannot be identified, the lamp blinks while the displayof the format identified up to the section concerned isretained.1080_59i, 1080_60i, 1035_59i, 1035_60i, 525_59i,1080_23p, 1080_24p, 720_59p, 720_60p, 1080_50i,1080_25p, 625_50iONoteNA tape recorded with the system format set to 1080/23.98psf or1080/23.98p is recorded in the same tape format, and “1080_23p”is displayed on the front panel when it is played back. Similarly,“1080_24p” appears on the front panel with a tape recorded usingthe 1080/24psf or 1080/24p system, and “1080_25p appearswhen a tape recorded using the 1080/25psf or 1080/25p system.T