Panasonic AJ-HDR150P Operating Instructions Manual

Panasonic AJ-HDR150P Operating Instructions Manual Manual pdf 22 page image

22Display Panel$ Parameter Setting ScreenEach parameter required by the unit is set.1. Then screen for selection of CONFIG TYPE isshown.CONFIG TYPE is selected with cursor button [!] or[1].USER SET7A/S SETIf the parameter does not need to be changed,press the [CANCEL] button.When the [CANCEL] button is pressed, mainscreen pattern 1 is restored.2. When the [SET] button is pressed, the unit movesto the screen for change of setting items or settingvalues.3. The setting items are changed by cursor button [#]or [2 ] and the settings are changed by cursorbutton [!] or [1].4. When setting value has been determined, press the[SET] button.By pressing the [SET] button, changes inparameters are recorded in the main unit. (Screendoes not change.)5. Similarly, other setting items are set by cursorbutton [#] [2] or [!] [1] and recorded by the [SET]button. To select CONFIG TYPE, press the[CANCEL] button.6. When all the settings are completed, press the[CANCEL] button and return to the screen forselecting CONFIG TYPE.CCHH11 CCLLIIPP00000011 0000::0000::0000::0000 ((CCTTLL11)) SSTTOOPP000000 SSEELLEECCTT CCOONNFFIIGG TTYYPPEE 22[[UUSSEERR SSEETT]]117. Press the [CANCEL] button again.When the USER SET parameter has beenchanged, one of the following screens will bedisplayed. Press the [SET] button to restart thesystem.If the USER SET parameter has not been changed,the system will return to Main Screen Pattern 1.CChhaannggeedd CCoonnff!! DDoo [[SSEERRVVEERR RREEBBOOOOTT]]SSEETT oorr CCAANNCCEELLCChhaannggeedd CCoonnff!! DDoo [[FFIILLEE SSYYSSTTEEMM IINNIITT]]SSEETT oorr CCAANNCCEELLO The USER SET parameter becomes effectivefollowing restart after the setting has been changedand the [SET] button has been pressed.When the USER SET parameter has beenchanged, be sure to always restart the unit.O The A/S SET parameter becomes effective after thesetting has been changed and the [SET] button hasbeen pressed.