192 Setup: Item SettingsThis menu is used for menu settings.• XX indicates factory default settings.MENUItem SettingSettings and brief function description RemarksFRNo.SUPERDISP.FRNo.SUPERDISP.A00 LOAD0000000100020003USER2USER3USER4USER5Specifies user files loaded in USER 1.0: Loads the contents of USER 21: Loads the contents of USER 32: Loads the contents of USER 43: Loads the contents of USER 5NOTE:Pressing the MENU button when loading completes opens aconfirmation dialog. Press the SET button to store the setting. Pressthe EXIT button to discard the change and retain the setting.Setting availablefor USER1 onlyA01 SAVE00000001000200030004USER2USER3USER4USER5LOCKEDSpecifies the user file that saves USER 1 settings.0: Saved to USER 21: Saved to USER 32: Saved to USER 43: Saved to USER 54: Appears when all user files are write protected.NOTE:• A user file in change prohibit status cannot be selected.• When all user files are in the change prohibit status, “LOCKED”appears and data cannot be saved.Setting availablefor USER1 onlyA02 P.ON LOAD00000001000200030004OFFUSER2USER3USER4USER5Specifies which user files will be loaded into USER 1 and whether ornot the USER 1 settings should be used in startup when the power isturned on.0: Operation is started with the settings of the previously set user file.1: The content of USER 2 is loaded into USER 1.2: The content of USER 3 is loaded into USER 1.3: The content of USER 4 is loaded into USER 1.4: The content of USER 5 is loaded into USER 1.Setting availablefor USER1 onlyA03 MENU LOCK00000001OFFONSets/releases the user file (USER2 - USER 5) lock mode.0: Releases the lock. (File data can be changed.)1: Lock is engaged. (File data cannot be changed.)NOTE:• USER 1 cannot be locked.• Files can be loaded from the SD memory card even if they arelocked. The status after load operation depends on the settingdefined by the loaded data.Setting availablefor USER2 toUSER5 onlyA04 PF1 ASSIGN Registers a setup menu item in the PF1 button.A05 PF2 ASSIGN Registers a setup menu item in the PF2 button.A06 PF3 ASSIGN Registers a setup menu item in the PF3 button.A10 CARD READ Select files from the four SD memory card files to load into the menu.This function is available only to USER 1-5 (SYSTEM) and USER 1-5.Setting availablefor USER1 onlyA11 CARD WRITESelect one of the four files on an SD memory card to write a menusetting.The write function is available only to USER 1-5 (SYSTEM).Titles can be added to the files and the files can be edited.Setting availablefor USER1 onlyA12 CARD FORMAT Formats SD memory cards. Setting availablefor USER1 only
