Panasonic AJ-HPX2000 Operating Instructions Manual

Also see for AJ-HPX2000: Review Manual

Contents

Panasonic AJ-HPX2000 Operating Instructions Manual Manual pdf 104 page image

104 Preparation Preparing for Audio InputTake the following steps to prepare the camera for connecting audio input devices.AJ-HPX2000 can be equipped with the AJ-MC900G stereomicrophone kit (an extra-cost option).1 Open the microphone holder.2 Mount the microphone and tighten the clampingscrew. The microphone must be attached with the UPmark on the microphone facing up.3 Connect the microphone cable to the MIC IN jack onthe camera.4 Set the AUDIO IN switch to [FRONT] depending onthe audio channel to be recorded.1 Remove the cover to insert the wireless receiver andsecure it with the screws.2 Set the AUDIO IN switch to [W.L.] depending on theaudio channel to be recorded.Preparing for Audio InputWhen Using the Front MicrophoneClamping ScrewMIC IN JackAUDIO INSwitchWhen Using a Wireless ReceiverWhen Using the Unislot Wireless Receiver