41Recording and Playback Shot Mark FunctionRecording and PlaybackA shot mark is added to the thumbnail of a clip todistinguish that clip from others. With the LCD monitor,only clips that have shot marks can be viewed and/orplayed back.To add a shot mark during recording, press the SHOTMARK button. The viewfinder displays “MARK ON” andadds a shot mark to the thumbnail of the appropriate clip.Another press of the button erases the shot mark.Shot marks may also be added or erased using clipthumbnails. For more information, see [Shot Mark] (page115).Notesz When the color bar is output or the unit is in LOOP RECmode and INTERVAL REC mode, it is impossible to add/delete shot marks.z It is impossible to add shot marks to incomplete clips(refer page 111).z For clips recorded on plural P2 cards or clips split on aP2 card (refer to Notes on page 10), a shot mark is addedto the top clip only.AJ-HPX2000 recording mode works according to the priorities outlined in the following table, relative to the setting of themenus and switches.* Disabled for color barsShot Mark FunctionAdding Shot MarksSHOT MARKbuttonRecording Setting and Operation ModeFunctionaloperation modeMenu switches related to system/recording Buttons Proxyrecording(optional)PC MODE RECSIGNALINTERVALREC MODELOOP RECMODEPRE RECMODERecording aText Memo Shot MarkUSB device USBDEVICE Disabled Disabled Disabled Disabled Disabled Disabled DisabledUSB host USB HOST Disabled Disabled Disabled Disabled Enabled Enabled Disabled1394 Input recordOFF1394 Disabled Disabled Disabled Enabled Enabled DisabledINTERVAL RECCAMERAVIDEOSDI (optional)ON orONE SHOT Disabled Disabled Disabled Disabled DisabledLOOP RECOFFON Enabled1s - 8s/15s Disabled Disabled DisabledNormal Recording OFF Enabled1s - 8s/15s Enabled* Enabled* Enabled
