Panasonic AJ-PX270 Operating Instructions Manual

Also see for AJ-PX270: Settings guide Quick guide Specifications Operating instructions Operating instructions

Power supply25- With the LCD monitor open- When the main menu → [OUTPUT SEL] → [SDI OUT] is set to [OFF]- When the main menu → [OUTPUT SEL] → [VIDEO OUT] is set to [OFF]- With the cable not inserted into the terminalt The battery and camera recorder will become warm during use or while charging.t Make sure that batteries are discharged before storing them.t When stored for long periods of time, it is recommended that you charge batteries once per year andthen use up the battery capacity by using the battery in the camera recorder before storing it again.t When the battery becomes extremely hot or cold, the lamp will flash several times andcharging will automatically begin.t When the battery is left unused and discharged for a long time, the lamp will flash severaltimes and charging will automatically begin.t If the lamp continues blinking even when the battery is at its optimal temperature, thebattery or battery charger may be damaged. Contact a dealer.t If the battery is warm, it will take longer than usual to charge.t If you use the battery charger near a radio, the radio sound may be distorted. Keep the battery andbattery charger at least 1 m away from radios when in use.t Noise may be emitted from the battery charger when using the battery charger, but this does not indicatea malfunction.r Supplied batteryf Remaining battery level display functionThe approximate remaining battery level can be checked by looking at the LED display of the battery.The displayed battery level may be different when the battery is attached to the camera and you areshooting and when the battery is not attached.f The supplied battery is intended for use only in this camera.Do not use it in other devices.Attaching and removing the batteryAttaching1 Insert the battery until you hear it clicks.