Panasonic AJ-PX270 Operating Instructions Manual

Also see for AJ-PX270: Settings guide Quick guide Specifications Operating instructions Operating instructions

4Read this first!FCC NOTICE (USA)Declaration of ConformityModel Number: AJ-PX270Trade Name: PanasonicResponsible Party: Panasonic Corporation of North AmericaTwo Riverfront Plaza, Newark, NJ 07102Support contact: 1-800-524-1448This device complies with Part 15 of the FCC Rules.Operation is subject to the following two conditions:(1) This device may not cause harmful interference, and (2) this device must accept anyinterference received, including interference that may cause undesired operation.To assure continued compliance, follow the attached installation instructions and do notmake any unauthorized modifications.CAUTION:This equipment has been tested and found to comply with the limits for a Class B digitaldevice, pursuant to Part 15 of the FCC Rules. These limits are designed to providereasonable protection against harmful interference in a residential installation. Thisequipment generates, uses and can radiate radio frequency energy and, if not installedand used in accordance with the instructions, may cause harmful interference to radiocommunications. However, there is no guarantee that interference will not occur in aparticular installation. If this equipment does cause harmful interference to radio or televisionreception, which can be determined by turning the equipment off and on, the user isencouraged to try to correct the interference by one of the following measures:f Reorient or relocate the receiving antenna.f Increase the separation between the equipment and receiver.f Connect the equipment into an outlet on a circuit different from that to which the receiver isconnected.f Consult the dealer or an experienced radio/TV technician for help.The user may find the booklet “Something About Interference”available from FCC local regional offices helpful.FCC Warning:To assure continued FCC emission limit compliance, follow the attached installationinstructions and the user must use only shielded interface cables when connecting to hostcomputer or peripheral devices. Also, any unauthorized changes or modifications to thisequipment could void the user’s authority to operate this device.NOTIFICATION (Canada)CAN ICES-3(B)/NMB-3(B)indicates safety information.The rating plate is on the underside of the Camera Recorder, Battery Charger and AC Adaptor.