Panasonic AJ-YA120AG Operating Instructions Manual

Panasonic AJ-YA120AG Operating Instructions Manual Manual pdf 26 page image

26Loading the user defaultsSet the LOCAL/MENU/REMOTE switch to theMENU position.The unit is set to the menu setting mode, and themenu screen appears on the video monitor.1Press the RESET button.The unit is now set to the default setting mode,and the default setting screen now appears onthe video monitor.2Press the MENU-UP button or MENU-DOWNbutton to move the cursor to the LOADposition, and press the SET button.The unit is set to the LOAD mode, and the LOADscreen appears on the video monitor.3SELECT MODE2 0 ESCAPE1 LOAD2 SAVE3 PROTECTSET–UP MENU 2 NOFACTORYUSER (ALL)USER (NOT SYSTEM)Press the MENU-UP button or MENU-DOWNbutton to move the cursor to the USER (ALL)position, and press the SET button.O When the cursor is moved to USER (NOTSYSTEM) and this operation is performed,everything except the SYSTEM menu settingsoperates according to the user settings storedin the memory.O When the cursor is moved to NO and thisoperation is performed, the display returns tothe menu screen without changing to the usersettings stored in the memory.4Set the LOCAL/MENU/REMOTE switch to theLOCAL or REMOTE position.This completes the menu setting procedure.5Menu protectionSet the LOCAL/MENU/REMOTE switch to theMENU position.The unit is set to the menu setting mode, and themenu screen appears on the video monitor.1By setting the unit to the menu protection mode, thesetup menu can no longer be opened even when theLOCAL/MENU/REMOTE switch is set to the MENUposition.Press the RESET button.The unit is now set to the default setting mode,and the default setting screen now appears onthe video monitor.23SELECT MODE2 0 ESCAPE1 LOAD2 SAVE3 PROTECTMENU PROTECT OK?2 NOYESTo initiate menu protection, press the MENU-UP button or MENU-DOWN button to movethe cursor to the YES position, and press theSET button.The menu screen now appears.4Setup (initial settings)Press the MENU-UP button or MENU-DOWNbutton to move the cursor to the PROTECTposition, and press the SET button.The unit is set to the menu protection settingmode, and the screen prompting the user toconfirm the menu protection appears on thevideo monitor.