Panasonic AK-HC1800G Operating Instructions Manual

Also see for AK-HC1800G: Parts list Operating instruction

- 18 (E) -ENGLISHWhen the camera is to be controlled from the AW-RP655 controllerIn the case of the AK-HC1800G camera, thefollowing buttons on the AW-RP655 will notwork.• WHITE BAL A/B/ATW• GAIN AUTO/MANU • DATA SETEach time the MODE button is pressed, thesetting is switched between CAM and BAR.The MODE button lights up at the BAR setting.When the LCD is in the gain adjustment modeSelect the desired gain setting from GAIN SELECTLOW to S.GAIN.When the LCD is in the pedestal adjustment modeAdjust the M PEDESTAL setting (–150 to +150).When the camera menu mode is establishedPerform the camera menu operations.Switch between gain adjustmentmode and pedestal adjustment mode.For executing ABB.*1When the LCD panel is in the gain adjustment modeAdjust the B GAIN setting (–150 to +150).When the LCD panel is in the pedestal adjustment modeAdjust the B PEDESTAL setting (–100 to +100).*1: The lamp of the ABB or AWB switch flashes whileautomatic white balance or automatic black balanceis being executed, respectively. When ABB or AWB iscompleted successfully, the corresponding lamp goesoff; when it is not completed successfully, it lights up.For executing AWB.*1When the LCD panel is in the gain adjustment modeAdjust the R GAIN setting (–150 to +150).When the LCD panel is in the pedestal adjustment modeAdjust the R PEDESTAL setting (–100 to +100).When the AK-HC1800G, to which the motor drive lens is connected, has been directlyconnected to the AW-RP655 controller, zooming and focusing can be controlled using thecontroller’s joystick. When changing the panel display for use with the AK-HC1800G, please use panel sheet VGKB0007 (soldseparately as a replacement part).Procedure for camera menu operation (AW-RP655) Press the MENU button to set the LCD panel display to the menu mode. Turn the jog dial (main) to select CAMERA SETTING. Press the OK button. The right display appears on the LCD panel:When the OK button is pressed again, the menu of the AK-HC1800G appears on themonitor.5 Turn the jog dial (main) to modify menu items of the AK-HC1800G and change thedata. When changing the data, the data settings are decremented by turning the dialclockwise and incremented by turning it counterclockwise. Push the jog dial (main) downto enter the settings.6 To exit the camera menu, press the MENU button or R/B GAIN/PED button.Ver.0010 or a subsequent version of the AW-RP655 software must be installed in order for theAK-HC1800G to be controlled using the AW-RP655.To check the software version of your AW-RP655, contact your dealer.How to set up the system