Panasonic AK-HC3500ES Operating Instruction

Also see for AK-HC3500E: Quick reference guide

0Component system configurationOutline of peripheral components Camera Control Unit (CCU: AK-HCU3550)This is the Multi-Format Camera’s camera control unit.It is connected to the Multi-Format Camera using anoptical fibre cable.HD/SD video input and output can be supported byinserting the HD/SD output unit. Remote Operation Panel(ROP: AK-HRP931/AK-HRP935)The ROP is connected to the CCU using the ROP cable,and enables the camera, CCU and lens to be operated byremote control. Master Setup Unit (MSU: AK-MSU935)When a multiple number of cameras and CCUs are used,the MSU can operate up to 1 units either separately orsimultaneously by remote control.It can be operated together with the ROP. 2˝ Electronic HD Viewfinder (2˝ VF: AJ-HVF21)This is the viewfinder for the Multi-Format Camera. 8˝ LCD Viewfinder (8˝ LCD VF: AK-HVF931A)This is the LCD viewfinder for the Multi-Format Camera.It can be used at the same time as the ˝ viewfinder.It can still be operated when the system is built up. Buildup Unit (AK-HBU3500*)A large-sized lens can be mounted on the multi-formatcamera to enable the same operations as for alarge-sized camera can be undertaken.*: Panasonic does not distribute AK-HBU3500 inEurope.Component connectionsRefer to pages 1 to for the component connections.After all the components have been connected (the monitorsystem may be connected afterward), set the CCU’s mainpower switch to the ON position.Then turn on the camera’s power switch.