Panasonic AKHC3500 - MULTI FORMAT CAMERA Operating Instructions Manual
Also see for AK-HC3500P: Operating instructions
                                            | |
Contents
|
40SpecificationsPower supply: DC 1 V(when external power is supplied)AC 150 V - 40 V(when CCU is connected)Power consumption: 8 W (during external powersupply operation, camera only)34 W (when CCU is connected)indicates safety information.Ambient temperature range:14 °F to 113 °F (–10 °C to +45 °C)[Preheating required at temperaturesbelow 3 °F (0 °C)]Storage temperature range:–4 °F to 140 °F (–0 °C to +60 °C)Operating ambient humidity:Less than 85 %Weight: Approx. 10.36 lbs. (4.7 kg)Dimensions: 5-5/16˝ 10-1/4˝ 14-3/16˝(W H D) (135 60 360 mm)[excluding protrusions]Basic items1) Pickup device: /3˝ . million pixel IT-CCD 3) System: GBR pickup system3) Color separation optical system:f/1.4 prism4) Optical filters: CC: 300K, 4300K, 6300K, Cross,DiffusionND: CAP, Through, 1/4, 1/16, 1/645) Lens mount: Bayonet type6) Output standard: SMPTE 9M7) Sensitivity: f/10.0, 000 lux, 300K,white reflectance 89.9 %(Vertical frequency: 59.94 Hz)8) Horizontal modulation:More than 50 % (7.5 MHz)9) S/N ratio: 60 dB typ. (Y: 30 MHz)10) Horizontal frequency:33.716 kHz, 115-line frame(Vertical frequency: 59.94 Hz)8.15 kHz, 115-line frame(Vertical frequency: 50 Hz)11) Vertical frequency:59.94 Hz or 50 Hz, interlaceInput/output signals1) MIC input: –0, –30, –40, –50, –60 dBm(XLR 3-pin female )Gain selected by camera menu) INCOM: 0 dBm/600 ohms(XLR, 5-pin female )(Mixing is controlled separately forPGM1 and PGM.)3) HD-SDI1/HD-SDI output:HD signal = 0.8 Vp-p, 75 ohms (BNC)The HD-SDI signal output can beadded to the regular images using thecamera menu item setting and switchedto the VF or RET image output.4) Prompt output: VBS signal = 1 Vp-p, 75 ohms (BNC)G/L input: Tri-level SYNC or black burst (BNC)Selected using a switch.5) HD RET input: HD analog signal = 1 Vp-p, 75 ohms(BNC)Prompt output: VBS signal = 1 Vp-p, 75 ohms (BNC)Down converter output:VBS or D1 signal = 1 Vp-p or 0.8 Vp-p,75 ohms (BNC)Input or output can be selected usingthe camera menu item setting.Control1) Power selection: EXT, OFF, CCU) USER 1, , 3: Functions specified by menu items canbe allocated to the switch.3) RET A/B selection:For selecting the return signal4) Monitor selection: Y/C, NAM, R, G, B5) RET, PTT SW: RET, PTT6) Gain selection: LOW, MID, HIGH7) Output selection: CAM, BAR, TEST8) White balance mode:A, B, preset9) Shutter speed selection:1/100, 1/15, 1/50, 1/500, 1/1000,1/00010) AWB, ABB settings11) Menu selection1) CALL SW13) INCOM: MIC ON/OFF, receive or PGM level14) MIC setting: MIC power, MIC gain, MIC1 selection15) Optical filter setting:REM, LOCAL selection and LOCALsetting16) Back light SW: ON/OFF* When the CCU is connected, the selection functionsfor 6) to 10) are not effective.Weight and dimensions shown are approximate.Specifications are subject to change without notice. |
Related manuals for Panasonic AK-HC3500P
Panasonic AK-HC1500 Operating Instructions Manual
Panasonic AK-HC900 Operating Instructions Manual
Panasonic WV-CP500 Operating Instructions Manual
Panasonic WV-CL500 Operating Instructions Manual
Panasonic AWE300S - SEPERATE CAMERA Operating Instructions Manual
Panasonic AW-E350 Operating Instructions Manual
Panasonic AW-E300 Operating Instructions Manual
Panasonic AW-E300 Operating Instructions Manual
Panasonic AK-HC1500G Operating Instructions Manual
Panasonic AK-HC1500G Operating Instructions Manual
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine