Panasonic AKHC930 - MULT FORMAT CAMERA Operating Instructions Manual

Contents

17Outline of peripheral components1 Camera control unit (CCU: AK-HCU931P)This is the Multi-Format Camera’s camera control unit. Itis connected to the Multi-Format Camera using an opticalfiber cable (optional accessory).As a standard feature, it supports SD video input andoutput, and it can also support HD video input and outputby connecting the HD output unit (AK-HHD931P).2 Remote operation panel (ROP: AK-HRP931P)The ROP is connected to the CCU using the ROP cable(optional accessory), and enables the camera, CCU andlens to be operated by remote control.3 Master setup unit (MSU:AK-MSU930P)When a multiple number of cameras and CCUs are used,the MSU can operate up to 15 units either separately orsimultaneously by remote control. It can be operatedtogether with the ROP.4 2z viewfinder (2zVF: AJ-HVF20P)This is the viewfinder for the Multi-Format Camera.5 Build-up unit (AK-HBU931P)This is an adapter used to mount a larger lens (optionalaccessory) on the Multi-Format Camera. Thereby, itaffords the same level of operability as that provided by alarger camera.6 LCD viewfinder (LCD VF: AK-HVF931P)This is the LCD viewfinder for the Multi-Format Camera.It can be used at the same time as the 2z viewfinder. Itcan still be operated when the system is built up.Component connections in an SD system1 Component connectionsRefer to pages 18 to 20 for the component connections.After all the components have been connected (themonitor system may be connected afterward), set theCCU’s main power switch to the ON position. Then turnon the camera’s power switch.Component system configuration