Panasonic AKHC930 - MULT FORMAT CAMERA Operating Instructions Manual

Contents

7A Lens mount (Bayonet type)This is where the lens is mounted.B Lens clamp leverThe lens is inserted into the lens mount A, and this leveris then turned to clamp the lens in place.C Lens cable, mic cable clampsThese are used to clamp the lens cable and mic cable inplace.D Tripod mountBefore securing the Multi-Format Camera to a tripod,attach the tripod adapter (SHAN-TM700) which isavailable as an optional accessory.E Shoulder padAdjust this pad in such a way that the Multi-FormatCamera can be operated easily when carried on theshoulder.The pad position can be moved forward or backwardonce the two fixing screws are loosened.F Optical fiber connector (EDW.3K made by LEMO)1 Camera power switch [POWER]This is used to select the camera power input (powersupplied from the CCU or from an external connector)and turn the power ON and OFF.2 Power LEDThis lights up red when power is supplied to the camera.3 Power circuit breaker [BREAKER]When an overcurrent flows to the camera, the breaker istripped, and the power supply is cut off.4 INCOM connectors 1, 2 [INCOM1, INCOM2]The INCOM or headset plugs are connected here.5 INCOM1 MIC ON/OFF switch [MIC1 TALK]This is the INCOM1 MIC ON/OFF selector switch.6 INCOM1 level control [INCOM1 LEVEL]This is used to adjust the INCOM1 receive level.7 INCOM2 MIC ON/OFF switch [MIC2 TALK]This is the INCOM2 MIC ON/OFF selector switch.8 INCOM2 level control [INCOM2 LEVEL]This is used to adjust the INCOM2 receive level.9 INCOM1 PGM selector switch [INCOM1 PGM]This is used to select the PGM to be mixed withINCOM1.: INCOM1 PGM level control [INCOM1 PGM]This is used to adjust the INCOM1 and PGM mixinglevel.; INCOM2 PGM selector switch [INCOM2 PGM]This is used to select the PGM to be mixed withINCOM2.< INCOM2 PGM level control [INCOM2 PGM]This is used to adjust the INCOM2 and PGM mixinglevel.= RET-A selector switch [RET A]This switch is used to select the return images to beswitched by RET-A.> RET-B selector switch [RET B]This switch is used to select the return images to beswitched by RET-B.? CALL LEDThis lights when the CALL switch is pressed. It alsolights in response to a call from the ROP or MSU.@ CALL switch [CALL]This lights the CALL LED on the ROP or MSU andsounds the buzzer.A OPT LEDThis indicates the camera’s optical signal receptionstatus. It normally lights up green. When any problemhas occurred, it lights up red.B Back tally LED selector switchThis is used to set the back tally LED to ON or OFF.C Back tally LEDThis lights when the tally signal is supplied.D RET switching control connector [RET CONT]The cable of the RET switching box (optional accessory)is connected here for controlling the ON/OFF settings ofRET1, 2, 3 and INCOM1 MIC.E Build-up unit connector [EXT I/O]The cable from the build-up unit (optional accessory) isconnected here.F Camera main line SDI output connector (BNC) [HDSDI]The camera main line’s HD-SDI images are output fromthis connector.G Optional video output connector (BNC) [AUX OUT]When the camera D/C unit (AK-HDC931, optionalaccessory) has been installed, the camera’s D/C images(VBS) are output from this connector.H Genlock sync input/PROMPT output connector[PROMPT/GL]When the GL/PROMPT selector switch is set to GL, thereference signal (tri-level SYNC) which is used togenlock the camera is input to this connector; when it isset to PROMPT, the images input from the CCU areoutput from this connector.I GL/PROMPT selector switchThis is used to select the genlock input or theinput/output (genlock input and PROMPT output) signalsof the PROMPT output connector.Controls and their functions