Panasonic AW-DU600P Operating Instructions Manual

Contents

14ConnectionsConnection procedure2 (:): Up8 (;): Down4 (!): Left6 (#): Right1 (TELE): Zoom in7 (WIDE): Zoom out3 (FAR): Focus (long-distance)9 (NEAR): Focus (close-up)5 (BAR): Color bar output0 (CAM): Camera thru output3 Select the pan-tilt head system to be controlled.Press the key ( i ) to changethe menu setting item.When “Menu-6 Output-2” appears on the LCD panel,use the ! # keys and selectP1, P2, P3, P4 or P5.STOPSTARTSTART2MENU+When the settings are completed, press thekey ( i ) once again to exit the menusettings.START2MENU+START1M12M20DELCAM5M5TELE3M3FAR7 8WIDE9NEAR4M4MENUCLEARSTOPMENURECALL6BAR4. When the settings are completed, turn the power of theAW-DU600 off and then back on again.The power of the pan-tilt-head system turns on andoperation is possible.5. The pan-tilt head system can be controlled in thefollowing ways using the operating keys on this adapter.Menuj 6 Output-2P 1 P 2 P 3 P 4 P 52 Set the CONTROL OUT connector according to thetype of pan-tilt connected and the connectiondistance.Press the key ( i ) to changethe menu setting item.When “Menu-5 Output-1” appears on the LCD panel,use the ! # keys and selectRS-2332C or RS-422 according to the pan-tilt headsystem to be connected.STOPSTARTSTART2MENU+1. Connect the pan-tilt head system to the CONTROLOUT connector on this adapter.2. Turn on the power to this adapter and the pan-tilt headsystem.3. Dial Up Adapter settings1 Set this adapter to direct mode.Press the key ( i ) to openthe menu settings.When “Menu-1 Function” appears on the LCD panel,use the ! # keys and selectDirect (direct mode).STOPSTARTSTART2MENU+Menuj 1 FunctionT x R x D i r e c tMenuj 5 Output-1R S j 2 3 2 C R S j 4 2 2