Panasonic AW-DU600P Operating Instructions Manual

Contents

6ConnectionsTransmitting system connectionsConnect the control panelWhen an AW-RP605 is usedTurn off the power of all components before proceeding with the connections.OWhen an AW-RP301 or AW-RP501 is being used,connect the receiving pan-tilt head system to the P1CONTROL OUT connector.OWhen an AW-RP505 or AW-RP605 is being used, it ispossible to select either P1, P2, P3, P4 or P5 for theconnected pan-tilt head system using the CONTROLbutton on the controller.OWhen an AW-RP301, AW-RP501 or AW-RP505 isbeing used as the controller, an AW-PH350 can not beused as the pan-tilt head.Version 45 or higher of the software must be installed inthe AW-RP605.Consult with your local dealer to check which softwareversion is currently installed.Telephone lineModemAW-DU600AW-PS301Coaxial cable(5C-2V)10Base-T cableRS-232C cableAW-PS301ControlpanelTelephone lineModemAW-DU600AC adapterAW-PS505AC adapterAW-PS30110Base-T cableAW-RP605Control panelAW-RP605Main unitSet the control panelselector switch to A.Set the control panelselector switch to B.