40Network settings Installing the softwareBe absolutely sure to read through the “Readme.txt” on theCD-ROM supplied with the unit first before attempting toinstall the software.Software provided on the CD-ROM Easy IP Setup Software (EasyIPSetup.exe)This software establishes the unit’s network settings.For details, refer to the sections that follow. Use the Easy IP Setup Softwareto establish the unit’s settingsThe settings related to the unit’s network can be establishedusing the Easy IP Setup Software supplied.To establish the settings for a multiple number of units, thesettings must be selected for each camera involved.If the settings cannot be established using the Easy IP SetupSoftware, select the settings separately for the unit and PCon the network page of the setting menu.For further details, refer to the “Operating Instructions —” (PDF file). If, after the network settings have been established,another device in the same network has the same IPaddress, the network operations will not be performedproperly.Set the IP address in such a way that it does notduplicate an existing IP address. Do not establish network settings from a multiplenumber of Easy IP Setup Software programs at thesame time for a single camera.Similarly, do not perform the “Auto IP setting” operationof the AW-RP50 remote camera controller at the sametime.The IP address settings may no longer be recognizedas a result.Notes If the Easy IP Setup Software is run when usingMicrosoft® Windows® XP Home Edition SP3, an importantwarning screen concerning security may appear.If this is the case, click the [Unblock(U)] button. If the Easy IP Setup Software is run when usingMicrosoft ® Windows Vista®, you may be prompted to enterthe password for the Administrator account.If this is the case, disable “User Account Control” fromControl Panel. The Easy IP Setup Software is designed in such a waythat when around 20 or more minutes have passedafter the power was turned on, the MAC address and IPaddress of the target camera will no longer be displayed.It does this to improve the security. For details of the display time setting, refer to “Easy IPSetup accommodate period” (page 79 in the and Settings>). The Easy IP Setup Software cannot be used from adifferent subnet via a router. The unit cannot be displayed or its settings establishedusing an older version of the Easy IP Setup Software(Ver.2.xx). IPv6 is not supported.
