Panasonic AW-HE130WP Operating Instructions Manual

Also see for AW-HE130KE: Operating instructions Installation instructions Operating instructions

Contents

Panasonic AW-HE130WP Operating Instructions Manual Manual pdf 33 page image

Operating Instructions Multi-format support• You can switch between the following formats via the cameramenus or a web browser.Supported formats:1080/59.94p, 1080/29.97p*1 , 1080/23.98p, 1080/59.94i,1080/29.97PsF, 1080/23.98PsF, 720/59.94p, 480/59.94p (HDMI)or 480/59.94i (SDI), 1080/50p, 1080/25p*1 , 1080/50i, 1080/25PsF,720/50p, 576/50p (HDMI), and 576/50i (SDI)*1 Native outputIn terms of the VIDEO OUT signals, 480/59.94i or 576/50i signalsare output regardless of the format settings.These signals can be used for monitoring purposes.There is however a delay in the VIDEO OUT signal output by 120H(HD lines) when at 720p and by 90H (HD lines) for any other.• With the SD format, either "Squeeze", "LetterBox" or "SideCut"can be selected. 1/2.86-type MOS sensor and high-performance20x zoom lens featured• A newly developed 1/2.86-type full HD 3MOS sensor and DSP(digital signal processor) are incorporated. High-quality picturesare obtained by video processing in many different kinds of ways.• In addition to its optical 20x zoom lens, the unit comes with a 10xdigital zoom to achieve high-quality images that overflow withambiance.• A dynamic range stretcher (DRS) function that compensates foroverexposure and loss of dark detail and a digital noise reduction(DNR) function for minimizing image lag even in dark locationsand shooting scenes clearly are incorporated to reproduce cleanand clear images in a wide range of applications. Easy operation of unit enabled by itsintegration with a high-performance pan-tilthead unit• Operations at the high speed of 60°/s• Wide rotational angles with a panning range of ±175° and a tiltingrange from –30° to 210°• Quiet operation with noise levels of NC35• Storage of up to 100 positions in the preset memory(The number of preset memories that can be used varies from onecontroller to another.) Built-in night mode• The unit supports infrared shooting.By exposing subjects to infrared rays, shooting under ordinarilydifficult low-light conditions is possible.(Image output will be in black and white.)• The iris will be fixed at open. IP image output functions• The unit is equipped with image compression and IP transmissionLSI capabilities. Output in Full HD quality at up to 60 fps.• Operation with IP control allows for a wide range of applications,such as controlling the camera from remote locations. Standard serial communication support• Connect up to seven cameras to a commercially availablecontroller via RS-232C interface. High degree of compatibility with Panasonic’scurrently available controllers, enabling aflexible system to be put together• A maximum of five units can be operated by serial control fromone of Panasonic’s currently available controllers (AW-RP120,AW-RP50 and AW-HRP200).The unit can also be used together with the cameras and pan-tilthead unit systems currently available from Panasonic Corporationso that an existing system can be used to advantage to puttogether a system that is even more flexible.• It may be necessary to upgrade the version of the controllerin order to support the unit. For details on upgrading, visit thesupport page on the following website.http://pro-av.panasonic.net/The maximum distances between the units and controller is1000 meters (3280 ft). (when serial control is exercised)Use of an external device or some other means must beprovided separately in order to extend the video signalconnections. Easy construction of systems thanks tointegrated design used for pan-tilt head,camera and lens• By integrating the camera, lens and pan-tilt head into a single unit,it is now easier to construct systems. Use of easy-to-operate wireless remote control(optional accessory) is possible• A wireless remote control capable of operating up to four units canbe used.It can easily be used to set the various functions or switchbetween them while viewing the menu screens. Flexible camera layout enabled by simpleconnection and installation• This unit features excellent connectivity and installability thanksto the IP control; a lightweight main unit, and the turn-lockmechanism, which enables the user to install it on his or her own(only when used indoors).• Bear in mind that this unit is designed to be used indoors only:It cannot be used outdoors. Increased functionality with the same compactsize and weight of previous models• A wide range of features have been added while maintaining thecompact size, weight, and footprint of previous models of the unit. Easy connections and settings courtesy of IPcontrol• Up to a hundred units can be operated by IP connection from aPanasonic controller (AW-RP120, AW-RP50, AK-HRP200).(The maximum length of the LAN cables is 100 meters (328 ft).) PoE+ *2 eliminates need for camera powerconfigurations• Configurations for camera's power supply are not necessary whenthe unit is connected to a network device that supports the PoE+standard (IEEE802.3at compliant)*3 .• When using a PoE+ device that requires software authentication,it may take a few minutes after power supply starts before the unitis operational.• If the AC adaptor and a PoE+ power supply are connectedsimultaneously, the AC adaptor will have priority. If the AC adaptoris disconnected while both power supplies are connected, the unitwill restart automatically, and the image will be interrupted.• Use a Category 5e cable or higher when using a PoE+ powersupply. The maximum length of the cable between the powersupply unit and the unit is 100 meters (328 ft). Using a cable thatis lower than Category 5 may result in reduced power supplycapabilities.• When a PoE+ injector is connected to a personal computer thatsupports Gigabit Ethernet using a straight LAN cable, the personalcomputer may not recognize the injector in rare cases. In suchcases, connect the personal computer to the unit using a crossLAN cable (or via cross connection).*2 Power over Ethernet Plus. Referred to as "PoE+" in thismanual.*3 For details on PoE+ devices for which operation has beenverified, consult your local dealer or Panasonic representative.Features33