Panasonic AW-HEA10WPJ Operating Instructions Manual

Also see for AW-HEA10KEJ: Installation and operating instructions

6. Control pad and its buttonsPerform pan/tilt operations.The camera images can be adjusted in the horizontal, vertical, anddiagonal directions.• Panning and tilting are not possible when the zoom level is 1x. (→page 17)• When PinP is displayed, switch the control mode [Control] to [Main]before beginning operation. (→ page 18)Control padControl buttons Control buttons:Click to perform the pan/tilt operation.Control pad:Click or drag to perform the pan/tiltoperation.The nearer the click or drag operation is tothe edge, the faster the pan/tilt speed.• When the mouse is used for dragging and dropping from the controlpad area to a position outside this area, the panning, tilting andother operations will not stop.In a case like this, click the control pad area to stop theseoperations.7. Brightness [Brightness]Adjust the brightness of the images.You can switch between auto mode and manual mode.[Auto]Switch to auto mode.The brightness is adjusted automatically to match thescene.[Manual]Switch to manual mode.Adjust the brightness manually when, for example,shooting in a location that is too dark (light).[‒]Make the images darker in manual mode.This is disabled in auto mode.[+]Make the images brighter in manual mode.This is disabled in auto mode.• [Contrast Level] and [Back Light COMP.] cannot be set in manualmode.8. Image resolution list box [Image Resolution]Change the resolution of live images.640×360 Display at resolution of 640x360.320×180 Display at resolution of 320x180.9. PinP display [PinP Display]Turn on or off the function for extracting part of the camera image anddisplaying it in a small PinP (Picture in Picture) screen on the mainscreen.Off Turn off PinP display.On Turn on PinP display.10.PinP display position [PinP Position]Switch the PinP display position.Upper Right Display the PinP screen in the upper right of themain screen.Lower Right Display the PinP screen in the lower right of themain screen.Upper Left Display the PinP screen in the upper left of the mainscreen.Lower Left Display the PinP screen in the lower left of the mainscreen.11.Control mode [Control]Switch the control mode during PinP display to the main screen orPinP.Main Set the control mode to the main screen.PinP Set the control mode to PinP.12.Preset [Preset]Register the setting conditions you like to preset memory, and loadregistered settings. (Up to 9 presets)For details on registering and loading to/from preset memory, refer to“Using preset memory” (→ page 26).13.Camera title display areaDisplays the name for the unit set in the Basic screen (→ page 20).18Web screen operations (continued)