Panasonic AW-HR140PJ Operating Instructions Manual

Also see for AW-HR140: Operating instruction

Contents

Panasonic AW-HR140PJ Operating Instructions Manual Manual pdf 42 page image

Operating InstructionsNetwork settingsUse the Easy IP Setup Software to establish theunit’s settingsThe settings related to the unit’s network can be established using theEasy IP Setup Software.You can obtain Easy IP Setup Software (EasyIPSetup.exe) bydownloading it from the following website.http://pro-av.panasonic.net/To establish the settings for a multiple number of units, the settings mustbe selected for each camera involved.If the settings cannot be established using the Easy IP Setup Software,select the settings separately for the unit and personal computer onthe Network setup screen [Network] of the setting menu. (→ PDFpage 86)• If, after the network settings have been established, another device inthe same network has the same IP address, the network operationswill not be performed properly.Set the IP address in such a way that it does not duplicate an existingIP address.• Do not establish network settings from a multiple number of Easy IPSetup Software programs at the same time for a single camera.Similarly, do not perform the “Auto IP setting” operation of theAW-RP50 remote camera controller at the same time.The IP address settings may no longer be recognized as a result.• The Easy IP Setup Software cannot be used from a different subnetvia a router.• The unit cannot be displayed or its settings established using anolder version of the Easy IP Setup Software (version older thanVer 4.25R00).1. Start the Easy IP Setup Software.2. Click the [Search] button.3. Click the MAC address/IPv4 address of the camera to beset, and click the [Network Settings] button.• When a DHCP server is being used, the IP address allocated to theunit can be checked by clicking the [Search] button of the Easy IPSetup Software.• If the same IP address is used for any additional cameras, thenumbers of the additional cameras will be displayed in the [IPv4overlap] column of the cameras concerned.• When the [Access Camera] button is clicked, the Live screen of theselected camera is displayed.• This unit does not support an IPv4/IPv6 switching function.4. Input the network items, and click the [Save] button.• When a DHCP server is being used, [DNS] of the Easy IP SetupSoftware can be set to [Auto].• After the [Save] button is clicked, it takes about 2 minutes for thesettings in the unit to be completed. If the external DC power supplyor LAN cable is disconnected before the settings are completed, thesettings will be canceled. In this case, repeat the steps to establish thesettings.• When a firewall (including software) has been introduced, enableaccess to all the UDP ports.42