Panasonic BB-HCA7A Installation Manual

Contents

Panasonic BB-HCA7A Installation Manual Manual pdf 2 page image

2Indoor Use OnlyInstallation GuideAC AdaptorModel No. BB-HCA7APlease read this manual before using, and save thismanual for future reference.Panasonic Network Camera Website:http://www.panasonic.com/netcamSupported Product (Customer-Provided)This product is the dedicated AC adaptor for some ofour cameras. For the latest information, visit thePanasonic Network Camera support website athttp://panasonic.net/pcc/ipcam/Compatible Cameras (as of June 2009)Model No.: BB-HCM715A/BB-HCM735AAdditional network camera models may becomeavailable for use with this product.IMPORTANT SAFETY INSTRUCTIONSWhen using this product, basic safety precautions should always be followed to reduce the risk of fire, electric shock,or personal injury.1. Read and understand all instructions.2. Keep these instructions.3. Heed all warnings.4. Follow all instructions.5. Do not expose this product to rain or any type of moisture.6. Do not install near any heat sources such as radiators, heat registers, stoves, or other devices (includingamplifiers) that produce heat.7. Protect the AC adaptor cord, the AC cord and the extension cord from being walked on or pinched particularlyat plugs, convenience receptacles, and the point where they exit from this product.8. Do not touch the AC adaptor, the AC adaptor cord, the AC cord and the extension cord during lightning storms.9. Unplug this product from power outlet when unused for long periods of time.10. Refer all servicing to qualified service personnel. Servicing is required when this product has been damaged inany way, such as the AC adaptor, the AC cord or the plug is damaged, or this product does not operate normally.11. The AC adaptor, the AC adaptor cord, the AC cord and the extension cord are not splash resistant, and areintended for indoor use only. The AC adaptor, the AC adaptor cord, the AC cord and the extension cord must bewaterproofed for outside use.12. Unplug this product from power outlet if it emits smoke, an abnormal smell or makes unusual noise. These conditionscan cause fire or electric shock. Confirm that smoke has stopped and contact an authorized service center.13. The AC cord is used as the main disconnect device, ensure that the socket-outlet shall be installed near theequipment and shall be easily accessible.SAVE THESE INSTRUCTIONSFCC and Other InformationThis equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in aresidential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installedand used in accordance with the instructions, may cause harmful interference to radio communications. However,there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmfulinterference to radio or television reception, which can be determined by turning the equipment off and on, the useris encouraged to try to correct the interference by one or more of the following measures:• Reorient or relocate the receiving antenna.• Increase the separation between the equipment and receiver.• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.• Consult the dealer or an experienced radio/TV technician for help.How to Use This ManualThis manual describes safety instructions, includeditems, specifications, and how to connect this product.Abbreviation• “Network Camera” is called “Camera” in this manual.