Operating Instructions1312.10 SpecificationsThe recommended number of cameras that you can register, monitor and recordsimultaneously differs depending on the specifications of your computer.See Table 1 (see page 132) and Table 2 (see page 133) for details.Note• Table 1 shows the required specifications for a PC when using theBB-HCM515A network camera with the following settings: Image quality:Standard; Audio recording setting: Audio and Image; Multi-monitoring framerate: 2 frames/1 second; Multi-playback frame rate: 2 frames/1 second;Transparency of Image Information: Not specified.Table 2 shows the required specifications for a PC when using theBB-HCM515A network camera with the following settings: Image quality:Standard; Audio recording setting: Audio and Image; Multi-monitoring framerate: not specify; Multi-playback frame rate: not specify; Transparency ofImage Information: Not specified.However, the values are only estimates, and actual values will differdepending on the recording method and system configuration.• If you use other applications while operating this software, the CPU will havea higher load, and performance of this software will be affected. For bestresults, do not run other software while operating this software.• When using the MPEG-4 format, the multi-monitoring frame rate and CPUusage will be higher, possibly resulting in unstable/unreliable performance.When using MPEG-4, set a frame rate for the multi-monitoring page.