Panasonic BL-C101A - Fixed MPEG-4 Network Camera Installation Manual

Also see for BL-C101: Comparison chart Setup guide Important information

Contents

Panasonic BL-C101A - Fixed MPEG-4 Network Camera Installation Manual Manual pdf 1 page image

Installation GuideNetwork CameraModel No. BL-C101 (Wired Type)BL-C121 (Wireless/Wired Type)This manual is written for both the BL-C101 (Wired Type) and BL-C121 (Wireless/Wired Type). Available features and operations vary slightlydepending on the model. You can confirm the model no. of your camera by checking the model no. printed on the front of the camera.Model number suffixes (“A”, “CE”, and “E”) are omitted from the following model numbers shown in this document, unless necessary.BL-C101A, BL-C101CE, BL-C101E, BL-C121A, BL-C121CE, BL-C121EPlease read the included Important Information before proceeding.Complete Operating Instructions and all other documentation can be found on the included CD-ROM.• This document (Installation Guide) explains how to physically connect the camera to the power supply and network, as well how to mount or place thecamera for regular use.• The Setup Guide describes how to set up the camera so that it can be accessed using a PC.• Refer to the Operating Instructions on the CD-ROM for details regarding the camera’s features.• Refer to the Troubleshooting Guide on the CD-ROM if you have any problems configuring or using the camera.Abbreviations• UPnP is the abbreviation for “Universal Plug and Play”.• The Network Camera is referred to as “the camera” in this document.• The Setup CD-ROM is referred to as “the CD-ROM” in this document.Installation Procedure OverviewThe following is an overview of the steps required to install and setup the camera. All steps are explained in this document unless otherwise noted.Preparation1. Confirm the following items are included in the camera’s packaging.2. You will need the following additional items to install and configure the camera.– a PC (see the system requirements in the Important Information document)– For BL-C101: 2 LAN cables (CAT-5 straight cable)For BL-C121: a LAN cable (CAT-5 straight cable)– a routerPreparationConfirm that you have all theitems required for installation.Camera DiagramMake sure you know the namesof the camera’s physicalfeatures.ConnectionsConnecting the camera to yournetwork and to the power outlet.SetupSetting up the camera(described in the included SetupGuide). This involves configuringthe camera so that it can beaccessed from a PC.MountingMounting or placing the camera.Main Unit (1 pc.)The appearance of yourcamera depends on whichmodel you have purchased.Screw A BL-C101 (6 pcs.)/BL-C121(4 pcs.)Order No. XTB4+20AFJUsed for wall mounting the camera.Washer S (1 pc.)Order No. XWG26D12VWUsed when securing the safetywire to the camera.AC Adaptor (1 pc.)Order No. PQLV206YCord Length: About 3 m(9 feet 10 inches)BL-C101A/BL-C121AScrew B (1 pc.)Order No. XTB26+10GFJUsed for securing the safety wire tothe camera.Washer L (1 pc.)Order No. XWG4F16VWUsed when securing the safetywire to the wall.Order No. PQLV216CE1ZCord Length: About 3 m(9 feet 10 inches)BL-C101CE/BL-C101E/BL-C121CE/BL-C121ESafety Wire (1 pc.)Order No. PQME10080ZUsed to secure the camera when wallmounting it.Flexible Stand (1 pc.)Order No. PNKL1008ZUsed to attach the camera to thewall.AC Cord (1pc. for BL-C101CE/BL-C101E/BL-C121CE/BL-C121E)Order No. PFJA02A006ZCord Length: About 1.8 m(5 feet 11 inches)BL-C101CE/BL-C121CEImportant Information (1 pc.)Installation Guide(this document) (1 pc.)Setup Guide (1 pc.)Setup CD-ROM (1 pc.)Order No. PQQX15704MCDContains the Setup Programneeded to configure the camera,as well as the camera’sdocumentation.**See the included Important Informationfor a description of each document.Order No. PSJA1106ZCord Length: About 1.8 m(5 feet 11 inches)BL-C101E/BL-C121EBL-C101 OnlyBL-C101 BL-C121© Panasonic Communications Co., Ltd. 2008PNQX1566YA KK0908CM1108Please read this document before using the product, and save this document for futurereference. Panasonic Network Camera Website:http://panasonic.net/pcc/products/netwkcam/Indoor Use OnlyPower Transfer Unit (1 pc.)Order No. PNWP3C160AUsed to power the camera.

/ 4

Related manuals for Panasonic BL-C101