Panasonic BL-C20 Important Information Manual

Also see for BL-C20: Operating instructions Getting started Troubleshooting

Contents

Panasonic BL-C20 Important Information Manual Manual pdf 1 page image

Important InformationNetwork Camera2006 Panasonic Communications Co., Ltd. All Rights Reserved.PQQX14968ZA KK0206YR0 (CE)Model No. BL-C20Indoor Use Only How to Use This DocumentationPlease read this manual before using, and save this manual for futurereference.Trademarks• Microsoft and Windows are either registered trademarks or trademarks ofMicrosoft Corporation in the United States and/or other countries.• Pentium is a trademark or registered trademark of Intel Corporation or itssubsidiaries in the United States and other countries.• All other trademarks identified herein are the property of their respectiveowners.Abbreviations• "Network Camera" is called "camera" in this manual.• "Setup CD-ROM" is called "CD-ROM" in this manual.The Network Camera includes the following 4 manual types.• Important Information (This manual)This manual has important information you will need to understandbefore installing.• Getting StartedGetting Started explains the initial configuration and mounting methodsof the Network Camera, to help you to set up the Network Cameraquickly and easily.• Operating Instructions (Included on the Setup CD-ROM)Operating Instructions explains the operations, settings, features andmaintenance of the Network Camera.• Troubleshooting (Included on the Setup CD-ROM)Troubleshooting provides troubleshooting help.Environment:Do not install the camera where the temperature is less than +5 ˚C or greater than +40 ˚C. Allow 10 cm clearance around the unit for proper ventilation.Avoid excessive smoke, dust, mechanical vibration, shock, or direct sunlight.Routine care:Wipe the unit with a soft cloth. Do not use benzine, thinner, or any abrasive powder.When you leave the unit unused for a long period of time, disconnect the AC adaptor from the power outlet.If you have any problems:Consult an authorized service center.CAUTION:• This equipment must be installed and operated in accordance with provided instructions and a minimum 20 cm spacing must be provided betweenantenna and all person's body (excluding extremities of hands, wrist and feet) during wireless modes of operation.• This transmitter must not be co-located or operated in conjunction with any other antenna or transmitter.• MedicalConsult the manufacturer of any personal medical devices, such as pacemakers, to determine if they are adequately shielded from external RF (radiofrequency) energy. (The unit operates in the frequency range of 2.412 GHz to 2.472 GHz, and the power output level is 0.1 watts.) Do not use the unit inhealth care facilities if any regulations posted in the area instruct you not to do so. Hospitals or health care facilities may be using equipment that couldbe sensitive to external RF (radio frequency) energy.• Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate this device.Video Recording Notice:PLEASE NOTE that under certain circumstances, video recording may be PROHIBITED by law. This device should be used only in compliance with allapplicable federal, state and local statutes.No responsibility will be taken by our company with respect to consequences resulting from the use, damage or both of the camera.When using this unit, basic safety precautions should always be followed toreduce the risk of fire, electric shock, or personal injury.1. Read and understand all instructions.2. Keep these instructions.3. Heed all warnings.4. Follow all instructions.5. To clean the camera lens, first remove any dust or dirt from thelens, then wipe the lens with a cotton bud.6. Do not block any ventilation openings. Install in accordance withinstructions.7. Do not install near any heat sources such as radiators, heatregisters, stoves, or other devices (including amplifiers) thatproduce heat.8. Protect the AC adaptor cord from being walked on or pinchedparticularly at plugs, convenience receptacles, and the point wherethey exit from the unit.9. The AC adaptor is used as the main disconnect device. Ensurethat the power outlet is located/installed near the equipment and iseasily accessible.10. Only use attachments/accessories (such as stands) specified bythe manufacturer.11. Do not touch the unit, AC adaptor, or AC adaptor cord duringlightning storms.12. Unplug the unit when unused for long periods of time.13. Refer all servicing to qualified service personnel. Servicing isrequired when the unit has been damaged in any way, such as theAC adaptor is damaged, the unit does not operate normally, or hasbeen dropped.14. The camera is intended for indoor use only. Prolonged exposure todirect sunlight or halogen light may damage the CMOS sensor.15. Please check local regulations as outdoor use of the wirelessfeature is restricted in some countries/areas.16. Unplug this unit from power outlets if it emits smoke, an abnormalsmell or makes unusual noise. These conditions can cause fire orelectric shock. Confirm that smoke has stopped and contact anauthorized service center.SAVE THESE INSTRUCTIONSIMPORTANT SAFETY INSTRUCTIONSItem DescriptionOperatingSystemPentium ® III (500 MHz or greater is recommended.)CPUProtocol TCP/IP protocol (HTTP, TCP, UDP, IP, DNS, ARP, ICMP)10/100 Mbps network card installedWeb Browser Internet Explorer 6.0 or later (Not included on the CD-ROM)InterfaceSystem Requirements for your PCNoteSee Panasonic Network Camera support website athttp://panasonic.co.jp/pcc/products/en/netwkcam/ for details aboutnetwork environment.Microsoft ® Windows ® XP (Home Edition, Professional),Microsoft ® Windows ® 2000, Microsoft ® Windows ® Me,Microsoft ® Windows ® 98SEObstacles during Wireless ConnectionThe radio wave range may decrease depending on the surroundingenvironment or existence of obstacles. If obstacles such as the followingare placed between a camera and a router, radio waves will weaken.Therefore, even if the distance between the camera and router is short, theframe rate may decrease or images may not be displayed.• A metallic door or shutter• A wall with an insulation material that contains aluminum foil• A wall made of tin• A wall made of concrete, stone or brick• Fireproof glass• Several walls separated by open space• A steel shelfYour PC (Personal Computer) and network must meet the followingtechnical specifications for the camera to work properly.

/ 2

Related manuals for Panasonic BL-C20