Panasonic BL-WV10A Setup Manual

Also see for BL-WV10A: Operating instructions Setup guide Service manual

Contents

Panasonic BL-WV10A Setup Manual Manual pdf 11 page image

Setup Guide11Adding More Cameras to the SystemUp to 8 BL-C10A or BL-C30A cameras can be registered to the BL-WV10A. If you purchase additionalcameras later, you can register them by setting the mode switch of the BL-WV10A to [SETUP], then turningthe unit off and on again. The Quick Setup utility will begin, and you can then follow the same procedure usedto register your existing cameras.Viewing Camera ImagesTo start up the BL-WV10A to view camera images, make sure the mode switch on the rear of the unit is set to[NORMAL] and turn on the BL-WV10A. The startup screen will appear. If the [Date and Time] screen appears,set the date and time, then press [ENTER]. The camera image should then appear.While camera images, you can aim the camera bypanning and tilting the lens using the navigator keys.Pressing [DISPLAY] repeatedly displays different cameraand image information.Pressing [ENTER] aims the camera at the camera’sHome Position.Pressing buttons [1]–[4] aims the camera at one of thePreset Positions. You can change the 4 preset positionsand register 4 additional Preset Positions (5–8) as well.For more information, see page xx in the OperatingInstructions.[DISPLAY][ENTER]Navigator keysIf the Camera Images Does Not AppearIf the image from a camera that you registered using Quick Setup does not appear, confirm that the camera isturned on and that the Ethernet cable is connected to the camera correctly. If the camera is a BL-C30A beingused in wired mode, make sure the camera’s switch is set to [WIRED].If the camera is a BL-C30A being used wirelessly, make sure the camera’s switch is set to [WIRELESS]. If thewireless signal from the BL-C30A is too weak, motion images may become disrupted. Confirm the strength ofthe signal by pressing [DISPLAY] while viewing the camera. Relocate the camera if the signal is too weak.Strongest signal Weakest signal No signal

/ 14

Related manuals for Panasonic BL-WV10A