Panasonic BT-LH1760P Menu Information

Also see for BTLH1760P - LCD VIDEO MONITOR: Operating instructions Operating instructions

Contents

24■ FUNCTION setting restrictionsSettings are not available under the following conditions.Setting Conditions that disable operationHV DELAY During SUB WINDOW, WFM, PIXEL TO PIXEL mode operation, “INVALID FUNCTION”appears to indicate that operation is disabled.When “RGB-COMP.” is selected under “YP B PR/RGB” or “DVI-COMP.” is selected under“DVI-D” in the “INPUT SELECT” menu, “INVALID FUNCTION” appears to indicate thatoperation is disabled.AUTO SETUP When something other than “RGB-COMP.” is selected under “YP BP R/RGB” in the “INPUTSELECT” menu, “NOT RGB-COMP. CH” appears to indicate that operation is disabled.When “RGB-COMP.” is selected under “YP B PR/RGB” in the “INPUT SELECT” menu andno signal is input, “INCOMPLETE” appears to indicate that operation is disabled.GAMMA SELECT When GPI is set, “INVALID FUNCTION” appears to indicate that operation is disabled.When “RGB-COMP.” is selected under “YP B PR/RGB” or “DVI-COMP.” is selected under“DVI-D” in the “INPUT SELECT” menu, “INVALID FUNCTION” appears to indicate thatoperation is disabled.SD ASPECT When GPI is set, “INVALID FUNCTION” appears to indicate that operation is disabled.During SUB WINDOW (still image) and HD display (including PIXEL TO PIXEL), “INVALIDFUNCTION” appears to indicate that operation is disabled.SCAN When GPI is set, “INVALID FUNCTION” appears to indicate that operation is disabled.During SUB WINDOW and PIXEL TO PIXEL mode operation, “INVALID FUNCTION”appears to indicate that operation is disabled.SUB WINDOW When “RGB-COMP.” is selected under “YP B PR/RGB” or “DVI-COMP.” is selected under“DVI-D” in the “INPUT SELECT” menu, “INVALID FUNCTION” appears to indicate thatoperation is disabled.If you select “RGB-COMP.” or “DVI-COMP.” while motion picture is displayed in sub-window, the screen returns to a single screen display. Selecting something other than“RGB-COMP.” or “DVI-COMP.” opens the split screen mode and a still image is blackedout.WFM/VECTOR During SUB WINDOW and PIXEL TO PIXEL mode operation, “INVALID FUNCTION”appears to indicate that operation is disabled.When “RGB-COMP.” or “RGB-VIDEO” is selected under “YP BPR /RGB”, or “DVI-COMP.” or“DVI-VIDEO” is selected under “DVI-D” in the “INPUT SELECT” menu, “INVALIDFUNCTION” appears to indicate that WFM operation is disabled.1080/23P, 24P, 25P, 29P or 30P input causes “INVALID FUNCTION” to appear indicatingthat operation is disabled,VECTOR does not appear when a selection other than “SDI” is made in the “INPUTSELECT” menu.MARKER When “RGB-COMP.” is selected under “YP B PR/RGB” or “DVI-COMP.” is selected under“DVI-D” in the “INPUT SELECT” menu, “INVALID FUNCTION” appears to indicate thatoperation is disabled.When GPI is set during sub-window operation, “INVALID FUNCTION” appears to indicatethat operation is disabled.PIXEL TO PIXEL When “SD1” or “SD2” is selected in the “INPUT SELECT” menu during 1080I/P signalinput or “YP B PR” is selected in “YP BPR/RGB”, 1080I/P signal input is enabled. When othersettings are made, “INVALID FUNCTION” appears to indicate that operation is disabled. InSUB WINDOW mode, “INVALID FUNCTION” appears to indicate that operation isdisabled.LEVEL METER When input is something other than SDI, “INVALID FUNCTION” appears to indicate thatoperation is disabled.MONO When GPI is set, “INVALID FUNCTION” appears to indicate that operation is disabled.TIMECODE When input is something other than HD-SDI input, “INVALID FUNCTION” appears toindicate that operation is disabled.Main Menu (continued)