Panasonic BT-LH1760P Menu Information

Also see for BTLH1760P - LCD VIDEO MONITOR: Operating instructions Operating instructions

Contents

27Main Menu (continued)■ “PIXEL TO PIXEL” and “PIXEL POSITION”The “PIXEL TO PIXEL” function allows you to check images at their actual pixel resolution (1080I/P signals only).Press the button ([FUNCTION1] to [FUNCTION5] (J page 23)) to which the “PIXEL TO PIXEL” function hasbeen assigned to turn the function on. Then press the button ([FUNCTION1] to [FUNCTION5] (J page 23)) towhich the “PIXEL POSITION” function has been assigned to position the display of signals. (This assumes thatthe “PIXEL TO PIXEL” and “PIXEL POSITION” functions have been assigned to any of the [FUNCTION1] to[FUNCTION5] buttons.)Underlined values indicate factory defaults.*1 The following settings are disabled in PIXEL TO PIXEL mode.Setting “ANAMO” to “ON”, and setting “SCAN” to “UNDER” in “VIDEO CONFIG”Any “HV DELAY” setting in “FUNCTION”“MARKER” display*2 Enabled during “SDI1”, “SDI2” and “YPB PR” input.■ “PIXEL POSITION” display position sequencePIXEL POSITION: ➀ J ➁ J ➂ J ➃ J ➄ J ➀ …….Sub menu Settings DescriptionPIXEL TO PIXEL*1*2 OFFONTailors the image display size to the input signal size.Compatible formats1080/60I/59I/50I/60P/59P/50P/30P/29P/25P/24P/23P/24Psf/23PsfPIXEL POSITION CENTERLEFT TOPRIGHT TOPRIGHT BOTTOMLEFT BOTTOMPositions the display of signals in PIXEL TO PIXEL mode. Center of the screen Left Top Right Top Right Bottom Left Bottom➀ CENTER ➁ LEFT TOP ➂ RIGHT TOP➃ RIGHT BOTTOM ➄ LEFT BOTTOM