|
39Main menu (continued)AUDIOSets the audio level meters to audio output (speakers, headphones).The underlined values are factory preset setting values.Sub menu Settings DescriptionINPUT SELECT AUTOANALOGSelects speaker, headphones output and audio level meter indication. When an SDI input line is selected with the INPUT SELECT button(→page 11) on the front panel: Embedded audio (SDI terminal)When an HDMI input line is selected with the INPUT SELECT button(→page 11) on the front panel: Embedded audio (HDMI terminal)When an input line other than SDI1, SDI2 or HDMI are selected with theINPUT SELECT button (→page 11) on the front panel: Analog (AUDIOinput terminal) Analog (AUDIO input terminal)SELECT L*1*2*4 CH1 - CH8(Factory default: CH1)Selects embedded audio channel output to the speaker or headphones (L).SELECT R*1*3*5 CH1 - CH8(Factory default: CH2)Selects embedded audio channel output to the speaker or headphones (R).SPEAKER OUT MIXLRSelects SPEAKER OUT status. Outputs a combination of the sound selected with [SELECT L] and [SELECT R]. Outputs the sound selected with [SELECT L]. Outputs the sound selected with [SELECT R].LEVEL METER OFFONTurns the audio level meter indication on and off. (→page 16)CH SELECT*6 2CH4CH8CHSelects number of audio level meter channels.POINT LINE OFFONTurns the 0 dB line (reference point) indication on the meter on and off.CH INFO. OFFONSwitches the channel displayed on the meter on and off.HEAD ROOM*7 12dB18dB *820dB *9Sets the display position of the reference point in the meter display.*1 When CH 5 to 8 are selected during SD signal input to the SDI terminal:The channel can be switched from CH5→CH1, CH6→CH2, CH7→CH3, and CH8→CH4. (The menu settings remain as is.)*2 When an HDMI signal is input, CH1 audio is output regardless of the menu setting.*3 When an HDMI signal is input, CH2 audio is output regardless of the menu setting.*4 When analog audio is selected, L audio is output regardless of the menu setting.*5 When analog audio is selected, R audio is output regardless of the menu setting.*6 When an HDMI signal or analog signal is input, 2CH is displayed regardless of the menu setting. When an SD-SDI signal is input,4CH is displayed even when 8CH is selected in the menu.*7 When an analog signal is input, the reference point is 20 dB regardless of menu setting.*8 Factory default setting for the BT-LH1850E.*9 Factory default setting for the BT-LH1850P. PreviousNext |