Panasonic CF-07 Series Reference Manual

Also see for CF-07 Series: Operating instructions Operating instructions Service manual Reference manual Tips for use

Contents

30Device ConfigurationSerial Port A* 1I/O IRQ*2Serial Port B* 3I/O IRQ*2Wireless Modem* 4I/O IRQResume on Wireless ModemGPS* 5I/O IRQParallel PortMode* 6I/O IRQ*2LANWake up from LAN*7VDW07 ControllerLegacy USB SupportDevice Configuration : [BIOS]Serial Port A: [Auto]Serial Port B: [Auto]Wireless Modem: [Auto]GPS: [Auto]Parallel Port: [Auto]Mode: [ECP]LAN: [Enable]Wake up from LAN: [Disable]VDW07 Controller: [Enable]Legacy USB Support: [Enable]BIOS OSDisable Enable Auto3F8/IRQ4 2F8/IRQ3Disable Enable Auto3E8/IRQ5 2E8/IRQ10Disable Enable Auto3F8/IRQ4 2F8/IRQ3Disable EnableDisable Enable Auto3E8/IRQ5 2E8/IRQ10Disable Enable AutoUni-directional Bi-directional EPP ECP378/IRQ7 278/IRQ5Disable EnableDisable EnableDisable EnableDisable EnableAdvanced Menu( : Default)*1 This is for use on the serial port of the computer.*2 This item is displayed only when the setting of each port is [Enable].*3 This is for use on the serial port of the port replicator.*4 This item is not displayed, for models without a build-in wireless modem.*5 This item is not displayed, for models without a build-in GPS.*6 This item is displayed only when [Parallel Port] is set to [Enable] or [Auto].*7 [Disable] is automatically set when [LAN] is set to [Disable].We recommend leaving [Disable] as the setting in the Setup Utility.When using the wake up from LAN function, refer to page 27.ParametersSetup Utility