Panasonic CF-18 Series Operating Instructions Manual

Also see for Toughbook CF-18 Series: Precautions for Installing Precautions for Installing Operating instructions Supplementary instructions Supplementary instructions

Contents

7 Getting StartedUsers are advised to purchase the latest versions of virus protection software and use them regularly.Computer VirusesWe recommend you run the software:• When booting your computer.• After receiving data.We recommend that you check data received on disks or from external sources, such as data down-loaded from the Internet, e-mail, etc. (For compressed files, uncompress them before running a check).Saving Data on the Hard DiskDo not expose your computer to shock.Use care when handling your computer, shock may damage your hard disk or make your software appli-cations and data unusable.Do not power down your computer while software applications are running or hard disk driveindicator ( ) is on.Properly shut Windows* down to avoid problems.Save all valuable data to disks.Backing up data to disks will limit damage should trouble occur to your computer or should you inad-vertently change or erase data.Use the security function for all important data. ( “Security Measures”)* This computer uses Microsoft® Windows ® XP Tablet PC Edition.Hard Disk LockWhen the Hard Disk Lock is set to [Enable], it is impossible to read/write data from/to the hard disk when thehard disk is installed in a different computer, since a password is also set for the hard disk. When the hard diskis returned to the original computer, you can read/write data as before. In this case, however, make the settingsin the Setup Utility exactly the same as they were before the hard disk was removed. (Note that this Hard DiskLock does not guarantee the complete protection of data.) ( “Security Measures”)When Disposing of or Transferring Ownership of This DeviceWhen disposing of or transferring ownership of this device, completely erase all data on the hard disk inorder to prevent the theft of hard disk data. Even if you delete data or initialize the hard disk through normalWindows commands, data can still be read using special software. In order to erase all data, either have thedata erased by a specialist (at a charge) or use the hard disk data erase utility (included) ( page 31).(Note that this hard disk data erase utility does not guarantee that data will be completely erased.)Also note that transferring ownership of this device without deleting software from the hard disk mayviolate software user’s licenses.When Using Peripheral DevicesPay strict attention to the following points to avoid damage to the computer, peripheral devices, cables, etc.Also, in addition to following this manual and the Reference Manual, carefully read the operating instruc-tions for the peripheral devices being used.Use only peripheral devices that conform to the computer’s specifications.Connect the devices properly, paying close attention to the condition and position of the connectors.If a connection cannot be made easily, do not apply undue force; check once more to confirm the condi-tion and position of the connector (alignment of pins, etc.) .If the connector has holding screws, fasten the screws firmly.Do not carry the computer with cables attached, and do not pull on the cables forcefully.