Panasonic CF-19 series Operating Instructions Manual

Also see for CF-19 series: Supplementary instructions Operating instructions Operating instructions Supplementary guide Operating instructions

Contents

16Getting Started2 Attaching the stylus to the computerUse the tether to attach the stylus to the computer so you will not lose it. Thereare holes (A) to attach it.CAUTION Do not pull the tether with excessive force. The stylus may hit the computer,person’s body or other objects when released.3 Opening the DisplayA Pull up the part (A) and release the latch.B Lift open the display.4 Connect your computer to a power outlet.The battery charging starts automatically.CAUTION Do not disconnect the AC adaptor and do not switch the wireless switch to onuntil the first-time operation procedure is completed. When using the computer for the first time, do not connect any peripheral deviceexcept the battery pack and AC adaptor. Handling the AC adaptor Problems such as sudden voltage drops may arise during periods of thunder andlightning. Since this could adversely affect your computer, an uninterruptible powersource (UPS) is highly recommended unless running from the battery pack alone.5 Turn on the computer.A Slide and hold the power switch (B) until the power indicator lights.CAUTION Do not slide the power switch repeatedly. The computer will forcibly be turned off if you slide and hold the power switch forfour seconds or longer. Once you turn off the computer, wait for ten seconds or more before you turn onthe computer again. Do not perform the following operation until the drive indicator turns off. Connecting or disconnecting the AC adaptor Sliding the power switch Touching the keyboard, touch pad, tablet buttons, touchscreen or externalmouse Closing the display Turn on/off the wireless switch When the CPU temperature is high, the computer may not start up to preventoverheating of the CPU. Wait until the computer cools down, and then turn thepower on again. If the computer does not power on even after cooling down,contact Panasonic Technical Support. Any changes from the default setting of the Setup Utility must not be made untilthe First-time Operation is completed.2First-time Operation