Panasonic CF-27 Series Toughbook Reference Manual

Also see for CF-27 Series: Operating instructions Operating instructions User guide User guide Operating instructions

4Touch Pad (Advanced)Wheel mode operations (almost identicalto the case of using the Microsoft ®IntelliMouse TM for scroll, zoom, etc., op-erations) are possible for Microsoft® wheelfunction-compatible applications.Microsoft® IntelliMouse TM is a mouse-typedevice that, in addition to the two conven-tional buttons, incorporates a wheel ableto rotate forwards/backwards.Use the touch pad to move the cursor on the display and perform normal computeroperations.The touch pad has the following two modes of operation.Scrolling AreaMicrosoft® IntelliMouseTM Wheel Mode(Setting at the time of purchase)Only scroll operation is possible for ap-plications not compatible with theMicrosoft® wheel function.Even for applications compatible with theMicrosoft ® wheel function, there arecases where only vertical scrolling oronly horizontal scrolling is possible in thismode.Scrolling side-to-sidePossible when a check markis added for [Horizontal].Scrolling up/down: Typical mouse operations use this area.When no check mark is added for [IntelliMouse Wheel mode], [Horizontal] and[Vertical] of [Scroll Configuration], the entire surface can be used for typicalmouse operations.Scrolling AreaScrolling up/downPossible when a checkmark is added for[Vertical].For the Pan and Auto Scroll functions, the en-tire work surface of the touch pad can be usedfor scrolling.Changing the mode of the touch pad1 Select from the taskbar and then select [Touch Pad] or select [Touch Pad] in[Start] - [Settings] - [Control Panel] - [Mouse].2 To set the Microsoft ® IntelliMouse TM Wheel modeAdd the check mark for [IntelliMouse Wheel mode] of [Scroll Configuration].To set the original modeDelete the check mark for [IntelliMouse Wheel mode] of [Scroll Configuration]and add the check mark for [Horizontal] and/or [Vertical] .3 Press [OK].When you are not sure whether an application is compatible with the Microsoft ®wheel function or not, try using both modes. Furthermore, depending on the appli-cation, there are cases where scrolling may not be possible with either mode.Original ModeLeft ButtonRight ButtonWork SurfaceNOTE(Excluding CF-27EB6GDCM)