Panasonic CF-27 Series Toughbook Reference Manual

Also see for CF-27 Series: Operating instructions Operating instructions User guide User guide Operating instructions

7When [PS/2 Compatible Mouse Port] is displayed in [Mouse]:1 Select [PS/2 Compatible Mouse Port] and then press [Properties].2 Select [Driver] - [Update Driver] and then press [Next].3 Select [Display a list of all the drivers....] and then press [Next].4 Press [Next].5 At the [Update Driver Warning], press [Yes] and then press [Next].6 At the [Insert Disk], press [OK].7 Input [c:\util\drivers\mouse] and then press [OK].8 Press [Finish].9 The display will ask you to restart Windows, press [Yes].When using a key combination such as Fn + F5 , do not touch the touch pad.If a key combination is used while the pad is being touched, the function of the keycombination will not work. In addition, it is possible that control of the cursor will belost and the cursor will not show proper movements. In such cases, the computerhas to be restarted by using the keyboard (e.g., ).Do not place any object on the work surface or press down forcefully with sharp-pointed objects (i.e. nails), hard objects that can leave marks (i.e. pencils and ballpoint pen).Do not allow things that could dirty the touch pad, such as oil. The cursor may notwork properly in such cases.When the touch pad becomes dirty:Wipe to remove dirty areas by using a dry soft cloth such as gauze or a soft clothfirst applied with detergent diluted with water and then thoroughly wrung.Do not use benzene or thinner, or disinfectant-type alcohol.The double-tapping speed of the touch pad cannot be changed.Handling the Touch PadCAUTIONNOTEWhen you want to re-enable the touch pad and touchscreen;1 Uninstall the driver or application software of an external mouse or trackballdevice. (please refer to the manual of the external device.)If the explanation of uninstalling the driver or application software can not befound in the manual of the external device, execute the following steps.In [Control Panel] - [System] - [Device Manager], when an external mouseor trackball device is displayed in [Mouse], press [Remove] to delete it, andthen press [OK] to confirm the deletion.2 Power off your computer ( "Operating Instructions" page 18) and removethe external mouse or trackball device.3 Turn the power on and run the Setup Utility ( page 44). In [Main] menu,set [Touch Pad] and [Touchscreen] to [Enable] and close the Setup Utility.4 In [Control Panel] - [Mouse] - [General], press [Change...] , then select [HaveDisk...]. Select "c:\util\drivers\mouse" at [Browse...] and press [OK]. Followthe on-screen instructions, then select [Close]. The computer will reboot.5 Confirm whether [touch pad/touchscreen] exists in [Mouse] (in [Control Panel]- [System] -[Device Manager]).Touch Pad (Advanced) (Excluding CF-27EB6GDCM)