Panasonic CF-28 Series Reference Manual

Also see for Toughbook CF-28 Series: Supplementary instructions Supplementary instructions Service manual Operating instructions Simplified service manual

411 Power off your computer ( "Starting Up/Shutting Down")Do not shut down using the standby or hibernation function.2 Connect the external display to your computer3 Turn on the external display, then turn on your computerAfter Windows starts up, the screen is displayed on the display destination set inthe following menu.Windows 2000 :[Start] - [Settings] - [Control Panel] - [Intel® Extreme Graphics] -[Devices]Windows XP :[Start] - [Control Panel] - [Other Control Panel Options] - [Intel®Extreme Graphics] - [Devices]The screen is not displayed based on the [Display] setting in the Setup Utility.It is possible to change the setting to display only on the external display or on boththe internal LCD and the external display with Fn + F3 .This combination does not work when the [Command Prompt] screen is set to “FullScreen”.External DisplayAbout [Intel® Extreme Graphics]The selection of the display destination, adjustment of the brightness and contrast, andsetting of the hotkey to change the display destination can be done in the followingmenu.Windows 2000 :[Control Panel] - [Intel® Extreme Graphics] - [Devices]Windows XP :[Control Panel] - [Other Control Panel Options] - [Intel® Extreme Graph-ics] - [Devices]Set number of colors, resolution, or refresh rate correctly to suit the externaldisplay.For more detailed information, refer to the operating instructions of the externaldisplay.NOTEExternal Display PortCAUTIONDo not press the Fn + F3 combination while MPEG files are playing.4 Select your external displayWindows 2000Set your external display for [Monitor] in [Control Panel] - [Display] - [Settings] -[Advanced].When a monitor that does not conform to the Plug & Play standards is connected,select [Monitor] - [Properties] - [Driver] - [Update Driver] and make the monitorsettings.Windows XPSet your external display for [Monitor] in [Control Panel] - [Appearance and Themes]- [Display] - [Settings] - [Advanced].When a monitor that does not conform to the Plug & Play standards is connected,select [Monitor] - [Properties] - [Driver] - [Update Driver] and make the monitorsettings.