Panasonic CF-37 Series Supplementary Instructions Manual

Also see for CF-37 Series: Operating instructions Supplementary instructions Supplementary instructions Reference manual Reference manual

Contents

6Windows 2000 Replace the first “NOTE” for the following. “OPERATING INSTRUCTIONS (page 14)”NOTEIf the Reference Manual is opened using a procedure that differs from the above explanation(e.g., double-clicking the manual from Windows Explorer, etc.), there are cases Acrobat Readerwill no longer start up. In such cases, restart the computer and then open the Reference Manualwith the above procedure.Reference Manual “OPERATING INSTRUCTIONS (page 14) ”Starting Up/Shutting Down “OPERATING INSTRUCTIONS (page 15) ”1 Open the display ( Operating Instructions page15)2 Turn your computer on ( Operating Instructions page 15)3 Select your operating systemSelect [Windows NT Workstation Version 4.00] and press Enter .LogonPress Ctrl + Alt + Del .45 Input your passwordWait for 10 seconds after confirming that the HDD access has been completed, and input the username and password, then select [OK]. Until the correct user name and password are entered, thecomputer will not operate.If [Cancel] is selected, the computer will return to the initial [Begin Logon] display.6 Select your applicationYou are able to start working on your computer.NOTEBe sure operations in Windows are performed after Windows completely starts up.For example, be sure operations in Windows are performed after the hard disk access dur-ing start up completes and all of the necessary icons are displayed on the taskbar.The power saving function is factory set to remove power from the LCD if the computer isnot operated or no access is made to a device for two minutes. The LCD will resume normaloperation if the touch pad is moved or if a key on the keyboard is depressed.Windows NT Replace the “Starting Up” steps for the following. “OPERATING INSTRUCTIONS (page 15)”Windows 2000 Perform the following after step 2. “OPERATING INSTRUCTIONS (page 15)”Enter your passwordNOTEAfter the [Press Ctrl + Alt + Del to logon] screen is displayed, it takes about 15 seconds beforethe touch screen begins to operate.Add the following “NOTE”. “OPERATING INSTRUCTIONS (page 14)”NOTEThere might be missing characters and underlined parts in the Reference Manual. In suchcases, printing out the contents will enable you to view the pages properly.