2 4Dealing with ProblemsWhen a problem occurs, please refer to this page. If you think it has to do with the software application you are using, pleaseread the related manual. If you cannot find a solution to a problem, please consult your nearest Panasonic dealer.Starting UpIf the fan ( page 37) in the back of the computer does not work, it may be a malfunction. Consult your nearest Panasonicdealer.DisplayEven after powering on, nodisplayThe power has not been cut,but after a certain period oftime, there is no displayAn afterimage appearsThe motion of a mousecursor is not smoothThe cursor does not movefrom mouse operationsThe power indicator is notlitThe power indicator isflashing orange and powerremains OFF[Enter Password:] or isdisplayedis not displayed(Once this icon is executed,will not be displayed later)[Post Start Up Error(s)] isdisplayedThe pre-memory count,Windows startup, or anoperation is extremelyslowThe date and time areincorrectThe AC adapter may not be properly connected.Pressing the reset button will solve the problem ( page 36).The CPU temperature is too hot. When the temperature of the CPU drops, power on again.Please input your password. If you have forgotten it, consult your nearest Panasonic dealer.If you deleted before you double-click , select [Start]-[Run], input [c:\util\avapp\psetup.bat],and press . Follow the message on the screen.page 23Run [Load Default Settings (PnP)] in the Setup Utility. This will restore the Setup Utility'ssettings to their default values (except the password settings), then the Setup Utility must be runonce again for you to input the appropriate operating environment settings. (The processingspeed depends on the application software used, so this operation may not cause the processingspeed to increase.)You can set the date and time through [Date/Time] in [Start] - [Settings] - [Control Panel].Another way is with the DATE and TIME commands in MS-DOS.If you continue to experience problems, the internal battery maintaining the clock mayneed to be replaced. Please consult your nearest Panasonic dealer.Adjust the brightness or contrast.When purchasing the computer, the display setting has been preset for an external display.When there is no display to an external display,• Check your cable connection for an external display.• Confirm an external display is on.If your computer is connected to an external display and the internal LCD has been set to"off", and the unit is placed in the hibernation or suspend mode, the internal LCD willremain in the "off" mode if the external display is not connected when the computer isrestarted. In this case, re-connect the external display and reboot the computer.Has your computer been set to the power-saving mode? To resume operation of yourcomputer, press any key.To save power, your computer may have automatically entered the suspend or hiberna-tion mode.If an image is displayed for a prolonged period of time, an afterimage may appear. This isnot a malfunction. The afterimage will disappear when a different screen is displayed.[Start]-[Settings]-[Control Panel]-[Mouse]-[Motion] and check [Show pointer trails].The Coffee break Password may be set.Check your mouse connections, and then reboot the computer from the keyboard.From the keyboard, you may choose to press down on or + then select[Shut Down].