Panasonic CF-71 Series Toughbook Reference Manual

Also see for CF-71 Series: Operating instructions Reference manual Operating instructions Reference manual Reference manual

34Using USB DevicesInstall the Windows 95 USB device drivers1 In [Start] - [Run], input [c:\util\msupdate\usb\usbsupp.exe], then press [OK].At the confirmation message, press [Yes].2 Read the [END-USER LICENSING AGREEMENT] and press [Yes] or [No].• Installation will start if [Yes] is pressed.• Installation will be aborted if [No] is pressed.3 At the display indicating the completion of installation, press [OK]. The com-puter will automatically restart.4 In [Start] - [Run], input [c:\util\msupdate\usb\usbcopy.bat], then press [OK].5 Click at the upper right corner to close the display.6 In [Start] - [Settings] - [Control Panel] - [System] - [Device Manager], select[PCI Universal Serial Bus] in [Other devices], press [Remove], then press[OK].7 Press [Refresh] and press [Close] at the [System Properties].8 Restart the computer.CAUTIONAfter a driver has been installed, do not use the suspend or hibernation func-tion. If the suspend or hibernation mode is activated, the computer may notfunction properly. Power off, then on, using the power switch to resume properoperation.If you want to use the suspend or hibernation function when the USB driver isinstalled, disable the USB device function of the computer. ( page 8)(To next page)2Set the power management function to disable1Installing USB Devices1 Run the Setup Utility. ( page 39)2 Using and , select [Power].3 Using and , select [Power Management] and press Enter .4 Using and , select [Disable] and press Enter .5 Using and , select [Sleep Switch] and press Enter .6 Using and , select [No Action] and press Enter .7 Using and , select [Fn+F7/Fn+F10 key] and press Enter .8 Using and , select [Disable] and press Enter .9 Press F10 , then select [Yes].