Panasonic CF-73JCLTXKM Operating Instructions Manual

Also see for CF-73JCLTXKM - Toughbook 73 - Pentium M 1.6 GHz: User guide

Contents

28TroubleshootingReinstalling SoftwareBefore Reinstallation1 Turn off the computer and insert the CD drive into themultimedia pocket. ( “Multimedia Pocket”)2 Turn on the computer, and press F2 while [Panasonic]boot screen is displayed.The Setup Utility will start up.If the password has been set, enter the Supervisor Pass-word.3 Write down all of the contents of the Setup Utility andthen press F9 .At the confirmation message, select [Yes] and then pressEnter .4 Select [Boot] menu, then select [CD Drive] and press F6until [CD Drive] is at the top of the [Boot] menu.5 Place the Product Recovery DVD-ROM into the CD drive.6 Press F10 .At the confirmation message, select [Yes] and pressEnter .The computer will restart.7 Press 1 to execute [1.[Recovery]].(You can cancel this operation by pressing 0 .)The License Agreement screen should appear.Reinstalling8 Press 1 to select [1. Yes, I agree to the provisions aboveand wish to continue!].This screen should appear.PreparingYou will need the Product Recovery DVD-ROM and CD drive.ImportantBefore the reinstallation procedure, remove all peripherals (except for the CD drive).Be sure the AC adaptor is connected until the reinstallation procedure is completed.Even if reinstallation is executed, the number of times that the DVD video region code can be set will not be returned tothe state set at the time of factory shipment. ( page 34)Windows XPWindows 20009 Make a selection from the menu.When selecting [2], enter the basic partition size forthe operating system installation and press Enter .(The data partition size is the remainder after subtract-ing the basic partition size.)To select [3], the initial partition size must be 6 GB ormore of the hard disk size. Reinstallation cannot be per-formed with a small partition size.When reinstall procedure is performed, the contents of the hard disk will be erased. Be sure to back up any critical data that ison your hard disk before running the reinstall procedure.The reinstall procedure will return the computer to its original condition.• If you have created partitions for data, the data may be erased or become corrupt as a result of the reinstall procedure.---------------------------------------------------------------------Select a number---------------------------------------------------------------------Reinstalling : Windows(R) XP Professional1. Reinstall Windows to the whole HDD to factory default.2. Make two partitions, for the operating system and data. And reinstallWindows to the operating system partition.(All existing partitions on HDD will be lost.)3. Reinstall Windows to the first partition.0. Cancel------------------------------------------------------------------------------------------------------------------------------------------Select a number---------------------------------------------------------------------Reinstalling : Windows(R) 2000 Professional1. Reinstall Windows to the whole HDD to factory default.2. Make two partitions, for the operating system and data. And reinstallWindows to the operating system partition.(All existing partitions on HDD will be lost.)3. Reinstall Windows to the first partition.0. Cancel---------------------------------------------------------------------