13 Getting StartedUseful InformationTroubleshootingAppendixFirst-time Operation PreparationA Check and identify the supplied accessories.If you do not find the described accessories, contact your technical support office.z You will need the serial number when you reinstall B’s Recorder or install B’s CLiP (Î page 29).B Read the LIMITED USE LICENSE AGREEMENT before breaking the seal on the computer’s packaging(Î page 33).Slide the battery pack in parallel with the arrow direction and attach it so that theleft and right projections on the new battery pack match the dents of the com-puter.In case that the projection does not match the dents of the computer, detach thebattery pack once, then slide it while pushing it lightly to avoid floating.z To removeSlide both the left and right latches to the unlockedposition, and push out the battery pack in parallel withthe computer.CAUTIONz Make sure the latches are securely locked. Otherwise the battery pack may fallwhen you carry the computer.z Do not touch the terminals of the battery pack and the computer. Doing so canmake the terminals dirty or damaged, and may cause malfunction of the batterypack and the computer.Hold the side of the computer with either of your hands and then hold and lift theA part to open the display.CAUTIONz Do not open the display wider than necessary (140° or more), and do not applyexcessive pressure to the LCD. Do not open or close the computer holding theedge of the LCD segment.• AC Adaptor . . . . 1Model No: CF-AA1633A• AC Cord . . . . . . 1 • Battery Pack . . .1Model No: CF-VZSU51W• Modem Telephone Cable . . . 1• Operating Instructions (This book) . . 1• Product Recovery DVD-ROM WindowsVista ® Business SP 1 . . . . . . . . . . . . . 1• Windows® Book . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1• Product Recovery DVD-ROM Windows® XPProfessional SP 2 . . . . . . . . . . . . . . . . . . . . . . . . . . . 11 Insert the battery pack.1BatteryLatches2 Open the display.A2