1 ABOUT LEAD FREESOLDER (PbF)Distinction of PbF PCB:PCBs (manufactured) using lead free solder will have a PbFstamp on the PCB.Caution :· Pb free solder has a higher melting point than standardsolder; Typically the melting point is 50 - 70°F (30 -40°C) higher. Please use a soldering iron withtemperature control and adjust it to 700 ± 20°F (370 ±10°C). In case of using high temperature soldering iron,please be careful not to heat too long.· Pb free solder will tend to splash when heated too high(about 1100°F/600°C)· This lead free solder will be used for the products afterserial No. 1,000,001.2 FEATURES· Detailed maps are used.· Desired places can be registered.· NotesDVD audio and video are not supported by this unit.This unit does not support all Video CD and CD formats.3 REPLACING THE FUSEUse fuses of the same specified rating (5A, 3A). Using differentsubstitutes or fuses with higher ratings, or connecting the unitdirectly without a fuse, could cause fire or damage to the stereounit.4 MAINTENANCEYour products is designed and manufactured to ensure aminimum of maintenance. Use a soft cloth for routine exteriorcleaning. Never use benzine, thinner or other solvents.5 NOTES[DVD DECK BLOCK]This model has no servo alignment points becausemicrocomputer controls the servo circuit6 DIMENSIONS7 LASER PRODUCTS3CN-D105T