Panasonic CQ-C1301NW Operating Instructions Manual

Also see for CQ-C1301NW: Operating instructions Operating instructions

Contents

seekn onStation PresetUp to 6 stations can be preset in AM (LW/MW), FM1, FM2, andFM3 respectively.Preset stations can be simply called up by pressing one of thepreset buttons from [1] to [6].Auto Preset Memory (APM)With this operation, stations with good receiving conditions canbe automatically stored in the preset memory.1 Select a band.2 Hold down [BAND] (APM) for more than 2seconds.The preset stations under best receiving conditions arereceived for 5 seconds each after presetting the stations(SCAN). To stop scanning, press one of the buttons from[1] to [6].Note: New stations overwrite existing saved stations.Manual station preset1 Tune into a station.2 Hold down one of the preset buttons from[1] to [6] for more than 2 seconds.(blinks once)Note: New stations overwrite existing saved stations.lights while receiving an FM stereo signal.Frequency Preset NumberBandDisplay changePress [DISP] to change the display.Radio Source Displaysec-6] toAM (LW/MW) mode:Band/frequencyCT (Clock Time)FM (not RDS) mode:Band/frequencyPSCTRDS mode:PS (Programme Service name)Band/frequencyCTauto-s. Theturn toe istings”)ioneek)on,withte PIPTY On/OffHolding down [DISP] (PTY) for more than 2 seconds togglesPTY mode on and off.Programme Search by PTYPrograms can be searched for by use of PTY that has beenoriginally preset.Press [1] to [6] to select PTY in the PTY mode.Another station in the same PTY is searched for by pressing[BAND].Notes:¡ When there is no corresponding programme type station,“NONE” is displayed.¡ A desired PTY appears for 5 seconds.¡ Preset contents are changeable.Detailed PTY Selection1 Press []] or [[] to select PTY.2 Press [BAND].Search starts.Notes:¡ To stop searching, press [BAND] (SET).¡ When there is no corresponding programme type station,“NONE” is displayed.PTY Preset ChangeOriginal PTY presets can be changed as you like.1 Select a PTY that you would like to preset.2 Follow the procedure of ordinary presetting.(a “Station Preset” in “Radio (AM[LW/MW]/FM)”)Programme Type Contents1 NEWS NEWS2 SPEECH AFFAIRS, INFO, EDUCATE,DRAMA, CULTURE, SCIENCE,VARIED, WEATHER, FINANCE,CHILDREN, SOCIAL, RELIGION,PHONE IN, TRAVEL, LEISURE,DOCUMENT3 SPORT SPORT4 POP M POP M5 CLASSICS CLASSICS6 MUSIC ROCK M, EASY M, LIGHT M,OTHER M, JAZZ, COUNTRY,NATION M, OLDIES, FOLK MSPEECH / MUSIC / NEWS / AFFAIRS /INFO / SPORT / EDUCATE / DRAMA /CULTURE / SCIENCE / VARIED / POP M /ROCK M / EASY M / LIGHT M / CLASSICS /OTHER M / WEATHER/ FINANCE / CHILDREN /SOCIAL / RELIGION / PHONE IN / TRAVEL /LEISURE / JAZZ / COUNTRY / NATION M /OLDIES / FOLK M / DOCUMENTPTY (Programme Type)TA On/OffPressing [TA] toggles TA on and off.Traffic Information Only (TA Mute)For listening to only traffic information, activate TA and set thevolume to 0 in FM mode.Once traffic information starts, the volume changes to the TAvolume. (a “Audio Settings”)TA (TrafficAnnouncement)Disc PlayerOperation Flow1 Press [SRC] to select the Disc Playersource.2 Select a desired portion.Track/file selectionPress [6] / [7].Note: To perform fast forward/reverse, hold down eitherof them.Disc Player (CD-DA disc):Previous/next trackDisc Player (MP3/WMA disc):Previous/next fileFolder selection (MP3/WMA)Press [{] / [}].PausePress [BAND] (y / 5).Press again to cancel.Random, Repeat, Scan Player Source DisplayCaution¡ Do not insert a disc when the indicator lights.¡ Refer to the section of “Notes on Discs” and “Notes onMP3/WMA”.¡ This unit does not support 8 cm discs.¡ If you insert an 8 cm disc and cannot eject it, turn ACC of your caroff once and turn it on again, then press [u] (Eject).¡ Do not insert foreign objects into the disc slot.CQ-C1321NMUTE/SQ SCROLL RANDOM SCAN REPEAT TA/AFPUSHSELTUNE/TRACKFOLDERBAND1 2 3 4 5 6PWR PTYVOLSRC DISPAPMD·MD·MBAND3 4 5 6SRC DISPDisc slottakes a disc in with the printed side facingup.Notes:¡ The power will be turned on automatical-ly when a disc is loaded at ACC ON.¡ A disc which has both CD-DA data andMP3/WMA data on it may not be repro-duced normally.(y / 5) (Pause/Play)toggles pause/play in theplayer source.[DISP] (Display)switches the information on thedisplay.[6] [7]skip to the previous/next track/file in the playermode.Hold down either of them for fast reverse/fast for-ward.[SRC] (Source)selects a source.(RANDOM)/(SCAN)/(REPEAT)toggles on/off each play mode.(SCROLL)scrolls the information on display.[}] [{]skip to the previous/next folder.[u] (Eject)ejects the disc.indicatorAudio SettingsCQ-C1321NMUTE/SQ SCROLL RANDOM SCAN REPEAT TA/AFPUSHSELTUNE/TRACKFOLDERBAND1 2 3 4 5 6PWR PTYVOLSRC DISPAPMD·MD·MDISP[DISP] (Display)exits from the audio menu.[VOL] (Volume)selects a value in the audio menu.(PUSH SEL) (Push to select)selects items in the audio menu.Audio menuNote: If the fader is set to front, the pre-amp. output (rear) is decreased.1 Press [VOL] (PUSH SEL) to display the audio menu display.Note: If no operation takes place for more than 7 seconds in the audio menu (2 seconds in Main volume adjust-ment), the display returns to the regular mode.2 Press [VOL] (PUSH SEL) to select amode to be adjusted.3 Turn [VOL] clockwise or counterclock-wise to adjust.(Setting Range: 0 to 40, Default: 18) q : Upw : Down(Setting Range: –12 dB to +12 dB by 2 dB,Default: 0 dB)q : Increasedw : Decreased(Setting Range: –12 dB to +12 dB by 2 dB,Default: 0 dB)q : Increasedw : Decreased(Setting Range: 15 levels each, Default CNT (cen-tre))q : Right enhancedw : Left enhanced(Setting Range: 15 levels each, Default CNT (cen-tre))q : Front enhancedw : Rear enhancedAllows you to mute the current source whilePanasonic navigation system provides voice guid-ance or car telephone conversation is in progress.(Setting Range: 0 (no sound), 1 (decrease 15steps), 2 (decrease 10 steps) and OFF(unchanged), Default: 0)q : Increasedw : DecreasedVolumeBassTrebleBalanceFaderExternal Mute(Setting Range: 1 to 40, Default: 18) q : Increasedw : DecreasedTA Volume SetFun[VOL]selects a valu(PUSH SELselects itemsFunction Menu

/ 8

Related manuals for Panasonic CQ-C1301NW